FM / library

/usr/share/doc/python2-docs/html/_sources/library/

/usr/share/doc/python2-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	14647	0644	edit dl rm
abc.rst.txt	7219	0644	edit dl rm
aepack.rst.txt	4257	0644	edit dl rm
aetools.rst.txt	3532	0644	edit dl rm
aetypes.rst.txt	4257	0644	edit dl rm
aifc.rst.txt	7086	0644	edit dl rm
al.rst.txt	5309	0644	edit dl rm
allos.rst.txt	695	0644	edit dl rm
anydbm.rst.txt	4111	0644	edit dl rm
archiving.rst.txt	424	0644	edit dl rm
argparse.rst.txt	74685	0644	edit dl rm
array.rst.txt	10524	0644	edit dl rm
ast.rst.txt	10111	0644	edit dl rm
asynchat.rst.txt	9206	0644	edit dl rm
asyncore.rst.txt	12937	0644	edit dl rm
atexit.rst.txt	3910	0644	edit dl rm
audioop.rst.txt	10395	0644	edit dl rm
autogil.rst.txt	1015	0644	edit dl rm
base64.rst.txt	6252	0644	edit dl rm
basehttpserver.rst.txt	10404	0644	edit dl rm
bastion.rst.txt	2611	0644	edit dl rm
bdb.rst.txt	12456	0644	edit dl rm
binascii.rst.txt	6508	0644	edit dl rm
binhex.rst.txt	1910	0644	edit dl rm
bisect.rst.txt	5415	0644	edit dl rm
bsddb.rst.txt	7575	0644	edit dl rm
bz2.rst.txt	8064	0644	edit dl rm
calendar.rst.txt	11282	0644	edit dl rm
carbon.rst.txt	15956	0644	edit dl rm
cd.rst.txt	11974	0644	edit dl rm
cgi.rst.txt	22853	0644	edit dl rm
cgihttpserver.rst.txt	2788	0644	edit dl rm
cgitb.rst.txt	2874	0644	edit dl rm
chunk.rst.txt	4955	0644	edit dl rm
cmath.rst.txt	7647	0644	edit dl rm
cmd.rst.txt	8565	0644	edit dl rm
code.rst.txt	7115	0644	edit dl rm
codecs.rst.txt	66966	0644	edit dl rm
codeop.rst.txt	3774	0644	edit dl rm
collections.rst.txt	41448	0644	edit dl rm
colorpicker.rst.txt	913	0644	edit dl rm
colorsys.rst.txt	1819	0644	edit dl rm
commands.rst.txt	2595	0644	edit dl rm
compileall.rst.txt	4678	0644	edit dl rm
compiler.rst.txt	37464	0644	edit dl rm
configparser.rst.txt	19607	0644	edit dl rm
constants.rst.txt	2328	0644	edit dl rm
contextlib.rst.txt	6012	0644	edit dl rm
cookie.rst.txt	9543	0644	edit dl rm
cookielib.rst.txt	27875	0644	edit dl rm
copy.rst.txt	3351	0644	edit dl rm
copy_reg.rst.txt	2329	0644	edit dl rm
crypt.rst.txt	2292	0644	edit dl rm
crypto.rst.txt	355	0644	edit dl rm
csv.rst.txt	22757	0644	edit dl rm
ctypes.rst.txt	90513	0644	edit dl rm
curses.ascii.rst.txt	9046	0644	edit dl rm
curses.panel.rst.txt	2740	0644	edit dl rm
curses.rst.txt	74877	0644	edit dl rm
custominterp.rst.txt	570	0644	edit dl rm
datatypes.rst.txt	864	0644	edit dl rm
datetime.rst.txt	74679	0644	edit dl rm
dbhash.rst.txt	3865	0644	edit dl rm
dbm.rst.txt	3117	0644	edit dl rm
debug.rst.txt	446	0644	edit dl rm
decimal.rst.txt	70926	0644	edit dl rm
development.rst.txt	640	0644	edit dl rm
difflib.rst.txt	30716	0644	edit dl rm
dircache.rst.txt	1813	0644	edit dl rm
dis.rst.txt	23248	0644	edit dl rm
distribution.rst.txt	426	0644	edit dl rm
distutils.rst.txt	1958	0644	edit dl rm
dl.rst.txt	3392	0644	edit dl rm
doctest.rst.txt	73985	0644	edit dl rm
docxmlrpcserver.rst.txt	3802	0644	edit dl rm
dumbdbm.rst.txt	2841	0644	edit dl rm
dummy_thread.rst.txt	1058	0644	edit dl rm
dummy_threading.rst.txt	799	0644	edit dl rm
easydialogs.rst.txt	10346	0644	edit dl rm
email-examples.rst.txt	1271	0644	edit dl rm
email.charset.rst.txt	9654	0644	edit dl rm
email.encoders.rst.txt	2376	0644	edit dl rm
email.errors.rst.txt	4006	0644	edit dl rm
email.generator.rst.txt	6132	0644	edit dl rm
email.header.rst.txt	7531	0644	edit dl rm
email.iterators.rst.txt	2421	0644	edit dl rm
email.message.rst.txt	25217	0644	edit dl rm
email.mime.rst.txt	9917	0644	edit dl rm
email.parser.rst.txt	10327	0644	edit dl rm
email.rst.txt	16111	0644	edit dl rm
email.utils.rst.txt	6475	0644	edit dl rm
ensurepip.rst.txt	5022	0644	edit dl rm
errno.rst.txt	6708	0644	edit dl rm
exceptions.rst.txt	18343	0644	edit dl rm
fcntl.rst.txt	7361	0644	edit dl rm
filecmp.rst.txt	5348	0644	edit dl rm
fileformats.rst.txt	302	0644	edit dl rm
fileinput.rst.txt	7417	0644	edit dl rm
filesys.rst.txt	806	0644	edit dl rm
fl.rst.txt	17646	0644	edit dl rm
fm.rst.txt	2699	0644	edit dl rm
fnmatch.rst.txt	3104	0644	edit dl rm
formatter.rst.txt	13245	0644	edit dl rm
fpectl.rst.txt	4171	0644	edit dl rm
fpformat.rst.txt	1747	0644	edit dl rm
fractions.rst.txt	5297	0644	edit dl rm
framework.rst.txt	11444	0644	edit dl rm
frameworks.rst.txt	378	0644	edit dl rm
ftplib.rst.txt	15720	0644	edit dl rm
functions.rst.txt	75554	0644	edit dl rm
functools.rst.txt	7448	0644	edit dl rm
future_builtins.rst.txt	2010	0644	edit dl rm
gc.rst.txt	9014	0644	edit dl rm
gdbm.rst.txt	4882	0644	edit dl rm
gensuitemodule.rst.txt	3113	0644	edit dl rm
getopt.rst.txt	6670	0644	edit dl rm
getpass.rst.txt	1876	0644	edit dl rm
gettext.rst.txt	29040	0644	edit dl rm
gl.rst.txt	6009	0644	edit dl rm
glob.rst.txt	2414	0644	edit dl rm
grp.rst.txt	2256	0644	edit dl rm
gzip.rst.txt	4828	0644	edit dl rm
hashlib.rst.txt	7379	0644	edit dl rm
heapq.rst.txt	13185	0644	edit dl rm
hmac.rst.txt	3073	0644	edit dl rm
hotshot.rst.txt	4289	0644	edit dl rm
htmllib.rst.txt	7379	0644	edit dl rm
htmlparser.rst.txt	11640	0644	edit dl rm
httplib.rst.txt	37454	0644	edit dl rm
i18n.rst.txt	409	0644	edit dl rm
ic.rst.txt	5005	0644	edit dl rm
idle.rst.txt	22182	0644	edit dl rm
imageop.rst.txt	4001	0644	edit dl rm
imaplib.rst.txt	17221	0644	edit dl rm
imgfile.rst.txt	2765	0644	edit dl rm
imghdr.rst.txt	2635	0644	edit dl rm
imp.rst.txt	12593	0644	edit dl rm
importlib.rst.txt	1126	0644	edit dl rm
imputil.rst.txt	7023	0644	edit dl rm
index.rst.txt	2287	0644	edit dl rm
inspect.rst.txt	28151	0644	edit dl rm
internet.rst.txt	950	0644	edit dl rm
intro.rst.txt	2803	0644	edit dl rm
io.rst.txt	39015	0644	edit dl rm
ipc.rst.txt	630	0644	edit dl rm
itertools.rst.txt	36324	0644	edit dl rm
jpeg.rst.txt	3858	0644	edit dl rm
json.rst.txt	25545	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	523	0644	edit dl rm
linecache.rst.txt	1887	0644	edit dl rm
locale.rst.txt	24975	0644	edit dl rm
logging.config.rst.txt	31560	0644	edit dl rm
logging.handlers.rst.txt	28153	0644	edit dl rm
logging.rst.txt	46882	0644	edit dl rm
mac.rst.txt	791	0644	edit dl rm
macos.rst.txt	3824	0644	edit dl rm
macosa.rst.txt	3964	0644	edit dl rm
macostools.rst.txt	4017	0644	edit dl rm
macpath.rst.txt	650	0644	edit dl rm
mailbox.rst.txt	68129	0644	edit dl rm
mailcap.rst.txt	3675	0644	edit dl rm
markup.rst.txt	1249	0644	edit dl rm
marshal.rst.txt	5689	0644	edit dl rm
math.rst.txt	10920	0644	edit dl rm
md5.rst.txt	2815	0644	edit dl rm
mhlib.rst.txt	3966	0644	edit dl rm
mimetools.rst.txt	4504	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
mimewriter.rst.txt	3360	0644	edit dl rm
mimify.rst.txt	3519	0644	edit dl rm
miniaeframe.rst.txt	2564	0644	edit dl rm
misc.rst.txt	248	0644	edit dl rm
mm.rst.txt	447	0644	edit dl rm
mmap.rst.txt	10481	0644	edit dl rm
modulefinder.rst.txt	3380	0644	edit dl rm
modules.rst.txt	382	0644	edit dl rm
msilib.rst.txt	19062	0644	edit dl rm
msvcrt.rst.txt	4346	0644	edit dl rm
multifile.rst.txt	6613	0644	edit dl rm
multiprocessing.rst.txt	92621	0644	edit dl rm
mutex.rst.txt	1939	0644	edit dl rm
netdata.rst.txt	432	0644	edit dl rm
netrc.rst.txt	3119	0644	edit dl rm
new.rst.txt	2653	0644	edit dl rm
nis.rst.txt	2108	0644	edit dl rm
nntplib.rst.txt	14531	0644	edit dl rm
numbers.rst.txt	8007	0644	edit dl rm
numeric.rst.txt	751	0644	edit dl rm
operator.rst.txt	22092	0644	edit dl rm
optparse.rst.txt	77101	0644	edit dl rm
os.path.rst.txt	13094	0644	edit dl rm
os.rst.txt	82580	0644	edit dl rm
ossaudiodev.rst.txt	17309	0644	edit dl rm
othergui.rst.txt	2721	0644	edit dl rm
parser.rst.txt	15385	0644	edit dl rm
pdb.rst.txt	16043	0644	edit dl rm
persistence.rst.txt	826	0644	edit dl rm
pickle.rst.txt	37262	0644	edit dl rm
pickletools.rst.txt	1997	0644	edit dl rm
pipes.rst.txt	3786	0644	edit dl rm
pkgutil.rst.txt	7714	0644	edit dl rm
platform.rst.txt	9554	0644	edit dl rm
plistlib.rst.txt	4134	0644	edit dl rm
popen2.rst.txt	7022	0644	edit dl rm
poplib.rst.txt	6220	0644	edit dl rm
posix.rst.txt	3630	0644	edit dl rm
posixfile.rst.txt	7200	0644	edit dl rm
pprint.rst.txt	9071	0644	edit dl rm
profile.rst.txt	28666	0644	edit dl rm
pty.rst.txt	1762	0644	edit dl rm
pwd.rst.txt	2725	0644	edit dl rm
pyclbr.rst.txt	3296	0644	edit dl rm
pydoc.rst.txt	4083	0644	edit dl rm
pyexpat.rst.txt	28891	0644	edit dl rm
python.rst.txt	514	0644	edit dl rm
py_compile.rst.txt	2479	0644	edit dl rm
queue.rst.txt	7034	0644	edit dl rm
quopri.rst.txt	2670	0644	edit dl rm
random.rst.txt	13319	0644	edit dl rm
re.rst.txt	55102	0644	edit dl rm
readline.rst.txt	10513	0644	edit dl rm
repr.rst.txt	4718	0644	edit dl rm
resource.rst.txt	9595	0644	edit dl rm
restricted.rst.txt	3327	0644	edit dl rm
rexec.rst.txt	11742	0644	edit dl rm
rfc822.rst.txt	14037	0644	edit dl rm
rlcompleter.rst.txt	2494	0644	edit dl rm
robotparser.rst.txt	2190	0644	edit dl rm
runpy.rst.txt	6938	0644	edit dl rm
sched.rst.txt	4644	0644	edit dl rm
scrolledtext.rst.txt	1379	0644	edit dl rm
select.rst.txt	20705	0644	edit dl rm
sets.rst.txt	14973	0644	edit dl rm
sgi.rst.txt	322	0644	edit dl rm
sgmllib.rst.txt	10664	0644	edit dl rm
sha.rst.txt	2807	0644	edit dl rm
shelve.rst.txt	8319	0644	edit dl rm
shlex.rst.txt	11313	0644	edit dl rm
shutil.rst.txt	13491	0644	edit dl rm
signal.rst.txt	10719	0644	edit dl rm
simplehttpserver.rst.txt	4559	0644	edit dl rm
simplexmlrpcserver.rst.txt	10881	0644	edit dl rm
site.rst.txt	7880	0644	edit dl rm
smtpd.rst.txt	2464	0644	edit dl rm
smtplib.rst.txt	14906	0644	edit dl rm
sndhdr.rst.txt	1759	0644	edit dl rm
socket.rst.txt	40765	0644	edit dl rm
socketserver.rst.txt	22512	0644	edit dl rm
someos.rst.txt	599	0644	edit dl rm
spwd.rst.txt	2825	0644	edit dl rm
sqlite3.rst.txt	35448	0644	edit dl rm
ssl.rst.txt	76554	0644	edit dl rm
stat.rst.txt	7778	0644	edit dl rm
statvfs.rst.txt	1300	0644	edit dl rm
stdtypes.rst.txt	122668	0644	edit dl rm
string.rst.txt	44085	0644	edit dl rm
stringio.rst.txt	4166	0644	edit dl rm
stringprep.rst.txt	4238	0644	edit dl rm
strings.rst.txt	746	0644	edit dl rm
struct.rst.txt	17100	0644	edit dl rm
subprocess.rst.txt	33648	0644	edit dl rm
sun.rst.txt	249	0644	edit dl rm
sunau.rst.txt	7124	0644	edit dl rm
sunaudio.rst.txt	5849	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	5064	0644	edit dl rm
sys.rst.txt	47520	0644	edit dl rm
sysconfig.rst.txt	7639	0644	edit dl rm
syslog.rst.txt	3931	0644	edit dl rm
tabnanny.rst.txt	1999	0644	edit dl rm
tarfile.rst.txt	28214	0644	edit dl rm
telnetlib.rst.txt	7482	0644	edit dl rm
tempfile.rst.txt	10504	0644	edit dl rm
termios.rst.txt	3733	0644	edit dl rm
test.rst.txt	17659	0644	edit dl rm
textwrap.rst.txt	8552	0644	edit dl rm
thread.rst.txt	6588	0644	edit dl rm
threading.rst.txt	32468	0644	edit dl rm
time.rst.txt	26020	0644	edit dl rm
timeit.rst.txt	11598	0644	edit dl rm
tix.rst.txt	22693	0644	edit dl rm
tk.rst.txt	1612	0644	edit dl rm
tkinter.rst.txt	33456	0644	edit dl rm
token.rst.txt	2451	0644	edit dl rm
tokenize.rst.txt	5570	0644	edit dl rm
trace.rst.txt	6724	0644	edit dl rm
traceback.rst.txt	10711	0644	edit dl rm
ttk.rst.txt	57411	0644	edit dl rm
tty.rst.txt	1011	0644	edit dl rm
turtle.rst.txt	64097	0644	edit dl rm
types.rst.txt	6200	0644	edit dl rm
undoc.rst.txt	6550	0644	edit dl rm
unicodedata.rst.txt	5736	0644	edit dl rm
unittest.rst.txt	82952	0644	edit dl rm
unix.rst.txt	490	0644	edit dl rm
urllib.rst.txt	24960	0644	edit dl rm
urllib2.rst.txt	35211	0644	edit dl rm
urlparse.rst.txt	16071	0644	edit dl rm
user.rst.txt	2748	0644	edit dl rm
userdict.rst.txt	9290	0644	edit dl rm
uu.rst.txt	2369	0644	edit dl rm
uuid.rst.txt	8378	0644	edit dl rm
warnings.rst.txt	19815	0644	edit dl rm
wave.rst.txt	5047	0644	edit dl rm
weakref.rst.txt	12926	0644	edit dl rm
webbrowser.rst.txt	9863	0644	edit dl rm
whichdb.rst.txt	931	0644	edit dl rm
windows.rst.txt	273	0644	edit dl rm
winsound.rst.txt	5066	0644	edit dl rm
wsgiref.rst.txt	30567	0644	edit dl rm
xdrlib.rst.txt	8077	0644	edit dl rm
xml.dom.minidom.rst.txt	11208	0644	edit dl rm
xml.dom.pulldom.rst.txt	1571	0644	edit dl rm
xml.dom.rst.txt	40182	0644	edit dl rm
xml.etree.elementtree.rst.txt	35707	0644	edit dl rm
xml.rst.txt	6090	0644	edit dl rm
xml.sax.handler.rst.txt	15371	0644	edit dl rm
xml.sax.reader.rst.txt	12257	0644	edit dl rm
xml.sax.rst.txt	6460	0644	edit dl rm
xml.sax.utils.rst.txt	3560	0644	edit dl rm
xmlrpclib.rst.txt	22559	0644	edit dl rm
zipfile.rst.txt	18871	0644	edit dl rm
zipimport.rst.txt	5957	0644	edit dl rm
zlib.rst.txt	12766	0644	edit dl rm
_winreg.rst.txt	23305	0644	edit dl rm
__builtin__.rst.txt	1494	0644	edit dl rm
__future__.rst.txt	4952	0644	edit dl rm
__main__.rst.txt	535	0644	edit dl rm

Edit: /usr/share/doc/python2-docs/html/_sources/library/json.rst.txt (25545B)

:mod:`json` --- JSON encoder and decoder
========================================

.. module:: json
   :synopsis: Encode and decode the JSON format.
.. moduleauthor:: Bob Ippolito <bob@redivi.com>
.. sectionauthor:: Bob Ippolito <bob@redivi.com>
.. versionadded:: 2.6

`JSON (JavaScript Object Notation) <http://json.org>`_, specified by
:rfc:`7159` (which obsoletes :rfc:`4627`) and by
`ECMA-404 <http://www.ecma-international.org/publications/standards/Ecma-404.htm>`_,
is a lightweight data interchange format inspired by
`JavaScript <https://en.wikipedia.org/wiki/JavaScript>`_ object literal syntax
(although it is not a strict subset of JavaScript [#rfc-errata]_ ).

:mod:`json` exposes an API familiar to users of the standard library
:mod:`marshal` and :mod:`pickle` modules.

Encoding basic Python object hierarchies::

>>> import json
    >>> json.dumps(['foo', {'bar': ('baz', None, 1.0, 2)}])
    '["foo", {"bar": ["baz", null, 1.0, 2]}]'
    >>> print json.dumps("\"foo\bar")
    "\"foo\bar"
    >>> print json.dumps(u'\u1234')
    "\u1234"
    >>> print json.dumps('\\')
    "\\"
    >>> print json.dumps({"c": 0, "b": 0, "a": 0}, sort_keys=True)
    {"a": 0, "b": 0, "c": 0}
    >>> from StringIO import StringIO
    >>> io = StringIO()
    >>> json.dump(['streaming API'], io)
    >>> io.getvalue()
    '["streaming API"]'

Compact encoding::

>>> import json
    >>> json.dumps([1,2,3,{'4': 5, '6': 7}], separators=(',',':'))
    '[1,2,3,{"4":5,"6":7}]'

Pretty printing::

>>> import json
    >>> print json.dumps({'4': 5, '6': 7}, sort_keys=True,
    ...                  indent=4, separators=(',', ': '))
    {
        "4": 5,
        "6": 7
    }

Decoding JSON::

>>> import json
    >>> json.loads('["foo", {"bar":["baz", null, 1.0, 2]}]')
    [u'foo', {u'bar': [u'baz', None, 1.0, 2]}]
    >>> json.loads('"\\"foo\\bar"')
    u'"foo\x08ar'
    >>> from StringIO import StringIO
    >>> io = StringIO('["streaming API"]')
    >>> json.load(io)
    [u'streaming API']

Specializing JSON object decoding::

>>> import json
    >>> def as_complex(dct):
    ...     if '__complex__' in dct:
    ...         return complex(dct['real'], dct['imag'])
    ...     return dct
    ...
    >>> json.loads('{"__complex__": true, "real": 1, "imag": 2}',
    ...     object_hook=as_complex)
    (1+2j)
    >>> import decimal
    >>> json.loads('1.1', parse_float=decimal.Decimal)
    Decimal('1.1')

Extending :class:`JSONEncoder`::

>>> import json
    >>> class ComplexEncoder(json.JSONEncoder):
    ...     def default(self, obj):
    ...         if isinstance(obj, complex):
    ...             return [obj.real, obj.imag]
    ...         # Let the base class default method raise the TypeError
    ...         return json.JSONEncoder.default(self, obj)
    ...
    >>> json.dumps(2 + 1j, cls=ComplexEncoder)
    '[2.0, 1.0]'
    >>> ComplexEncoder().encode(2 + 1j)
    '[2.0, 1.0]'
    >>> list(ComplexEncoder().iterencode(2 + 1j))
    ['[', '2.0', ', ', '1.0', ']']

.. highlight:: none

Using :mod:`json.tool` from the shell to validate and pretty-print::

$ echo '{"json":"obj"}' | python -m json.tool
    {
        "json": "obj"
    }
    $ echo '{1.2:3.4}' | python -mjson.tool
    Expecting property name enclosed in double quotes: line 1 column 2 (char 1)

.. highlight:: python

.. note::

JSON is a subset of `YAML <http://yaml.org/>`_ 1.2.  The JSON produced by
   this module's default settings (in particular, the default *separators*
   value) is also a subset of YAML 1.0 and 1.1.  This module can thus also be
   used as a YAML serializer.

Basic Usage
-----------

.. function:: dump(obj, fp, skipkeys=False, ensure_ascii=True, \
                   check_circular=True, allow_nan=True, cls=None, \
                   indent=None, separators=None, encoding="utf-8", \
                   default=None, sort_keys=False, **kw)

Serialize *obj* as a JSON formatted stream to *fp* (a ``.write()``-supporting
   :term:`file-like object`) using this :ref:`conversion table
   <py-to-json-table>`.

If *skipkeys* is true (default: ``False``), then dict keys that are not
   of a basic type (:class:`str`, :class:`unicode`, :class:`int`, :class:`long`,
   :class:`float`, :class:`bool`, ``None``) will be skipped instead of raising a
   :exc:`TypeError`.

If *ensure_ascii* is true (the default), all non-ASCII characters in the
   output are escaped with ``\uXXXX`` sequences, and the result is a
   :class:`str` instance consisting of ASCII characters only.  If
   *ensure_ascii* is false, some chunks written to *fp* may be
   :class:`unicode` instances.  This usually happens because the input contains
   unicode strings or the *encoding* parameter is used.  Unless ``fp.write()``
   explicitly understands :class:`unicode` (as in :func:`codecs.getwriter`)
   this is likely to cause an error.

If *check_circular* is false (default: ``True``), then the circular
   reference check for container types will be skipped and a circular reference
   will result in an :exc:`OverflowError` (or worse).

If *allow_nan* is false (default: ``True``), then it will be a
   :exc:`ValueError` to serialize out of range :class:`float` values (``nan``,
   ``inf``, ``-inf``) in strict compliance of the JSON specification.
   If *allow_nan* is true, their JavaScript equivalents (``NaN``,
   ``Infinity``, ``-Infinity``) will be used.

If *indent* is a non-negative integer, then JSON array elements and object
   members will be pretty-printed with that indent level.  An indent level of 0,
   or negative, will only insert newlines.  ``None`` (the default) selects the
   most compact representation.

.. note::

Since the default item separator is ``', '``,  the output might include
      trailing whitespace when *indent* is specified.  You can use
      ``separators=(',', ': ')`` to avoid this.

If specified, *separators* should be an ``(item_separator, key_separator)``
   tuple.  By default, ``(', ', ': ')`` are used.  To get the most compact JSON
   representation, you should specify ``(',', ':')`` to eliminate whitespace.

*encoding* is the character encoding for str instances, default is UTF-8.

If specified, *default* should be a function that gets called for objects that
   can't otherwise be serialized.  It should return a JSON encodable version of
   the object or raise a :exc:`TypeError`.  If not specified, :exc:`TypeError`
   is raised.

If *sort_keys* is true (default: ``False``), then the output of
   dictionaries will be sorted by key.

To use a custom :class:`JSONEncoder` subclass (e.g. one that overrides the
   :meth:`default` method to serialize additional types), specify it with the
   *cls* kwarg; otherwise :class:`JSONEncoder` is used.

.. note::

Unlike :mod:`pickle` and :mod:`marshal`, JSON is not a framed protocol so
      trying to serialize more objects with repeated calls to :func:`dump` and
      the same *fp* will result in an invalid JSON file.

.. function:: dumps(obj, skipkeys=False, ensure_ascii=True, \
                    check_circular=True, allow_nan=True, cls=None, \
                    indent=None, separators=None, encoding="utf-8", \
                    default=None, sort_keys=False, **kw)

Serialize *obj* to a JSON formatted :class:`str` using this :ref:`conversion
   table <py-to-json-table>`.  If *ensure_ascii* is false, the result may
   contain non-ASCII characters and the return value may be a :class:`unicode`
   instance.

The arguments have the same meaning as in :func:`dump`.

.. note::

Keys in key/value pairs of JSON are always of the type :class:`str`. When
      a dictionary is converted into JSON, all the keys of the dictionary are
      coerced to strings. As a result of this, if a dictionary is converted
      into JSON and then back into a dictionary, the dictionary may not equal
      the original one. That is, ``loads(dumps(x)) != x`` if x has non-string
      keys.

.. function:: load(fp[, encoding[, cls[, object_hook[, parse_float[, parse_int[, parse_constant[, object_pairs_hook[, **kw]]]]]]]])

Deserialize *fp* (a ``.read()``-supporting :term:`file-like object`
   containing a JSON document) to a Python object using this :ref:`conversion
   table <json-to-py-table>`.

If the contents of *fp* are encoded with an ASCII based encoding other than
   UTF-8 (e.g. latin-1), then an appropriate *encoding* name must be specified.
   Encodings that are not ASCII based (such as UCS-2) are not allowed, and
   should be wrapped with ``codecs.getreader(encoding)(fp)``, or simply decoded
   to a :class:`unicode` object and passed to :func:`loads`.

*object_hook* is an optional function that will be called with the result of
   any object literal decoded (a :class:`dict`).  The return value of
   *object_hook* will be used instead of the :class:`dict`.  This feature can be used
   to implement custom decoders (e.g. `JSON-RPC <http://www.jsonrpc.org>`_
   class hinting).

*object_pairs_hook* is an optional function that will be called with the
   result of any object literal decoded with an ordered list of pairs.  The
   return value of *object_pairs_hook* will be used instead of the
   :class:`dict`.  This feature can be used to implement custom decoders that
   rely on the order that the key and value pairs are decoded (for example,
   :func:`collections.OrderedDict` will remember the order of insertion). If
   *object_hook* is also defined, the *object_pairs_hook* takes priority.

.. versionchanged:: 2.7
      Added support for *object_pairs_hook*.

*parse_float*, if specified, will be called with the string of every JSON
   float to be decoded.  By default, this is equivalent to ``float(num_str)``.
   This can be used to use another datatype or parser for JSON floats
   (e.g. :class:`decimal.Decimal`).

*parse_int*, if specified, will be called with the string of every JSON int
   to be decoded.  By default, this is equivalent to ``int(num_str)``.  This can
   be used to use another datatype or parser for JSON integers
   (e.g. :class:`float`).

*parse_constant*, if specified, will be called with one of the following
   strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``.
   This can be used to raise an exception if invalid JSON numbers
   are encountered.

.. versionchanged:: 2.7
      *parse_constant* doesn't get called on 'null', 'true', 'false' anymore.

To use a custom :class:`JSONDecoder` subclass, specify it with the ``cls``
   kwarg; otherwise :class:`JSONDecoder` is used.  Additional keyword arguments
   will be passed to the constructor of the class.

.. function:: loads(s[, encoding[, cls[, object_hook[, parse_float[, parse_int[, parse_constant[, object_pairs_hook[, **kw]]]]]]]])

Deserialize *s* (a :class:`str` or :class:`unicode` instance containing a JSON
   document) to a Python object using this :ref:`conversion table
   <json-to-py-table>`.

If *s* is a :class:`str` instance and is encoded with an ASCII based encoding
   other than UTF-8 (e.g. latin-1), then an appropriate *encoding* name must be
   specified.  Encodings that are not ASCII based (such as UCS-2) are not
   allowed and should be decoded to :class:`unicode` first.

The other arguments have the same meaning as in :func:`load`.

Encoders and Decoders
---------------------

.. class:: JSONDecoder([encoding[, object_hook[, parse_float[, parse_int[, parse_constant[, strict[, object_pairs_hook]]]]]]])

Simple JSON decoder.

Performs the following translations in decoding by default:

.. _json-to-py-table:

It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as their
   corresponding ``float`` values, which is outside the JSON spec.

*encoding* determines the encoding used to interpret any :class:`str` objects
   decoded by this instance (UTF-8 by default).  It has no effect when decoding
   :class:`unicode` objects.

Note that currently only encodings that are a superset of ASCII work, strings
   of other encodings should be passed in as :class:`unicode`.

*object_hook*, if specified, will be called with the result of every JSON
   object decoded and its return value will be used in place of the given
   :class:`dict`.  This can be used to provide custom deserializations (e.g. to
   support JSON-RPC class hinting).

*object_pairs_hook*, if specified will be called with the result of every
   JSON object decoded with an ordered list of pairs.  The return value of
   *object_pairs_hook* will be used instead of the :class:`dict`.  This
   feature can be used to implement custom decoders that rely on the order
   that the key and value pairs are decoded (for example,
   :func:`collections.OrderedDict` will remember the order of insertion). If
   *object_hook* is also defined, the *object_pairs_hook* takes priority.

.. versionchanged:: 2.7
      Added support for *object_pairs_hook*.

If *strict* is false (``True`` is the default), then control characters
   will be allowed inside strings.  Control characters in this context are
   those with character codes in the 0--31 range, including ``'\t'`` (tab),
   ``'\n'``, ``'\r'`` and ``'\0'``.

If the data being deserialized is not a valid JSON document, a
   :exc:`ValueError` will be raised.

.. method:: decode(s)

Return the Python representation of *s* (a :class:`str` or
      :class:`unicode` instance containing a JSON document).

.. method:: raw_decode(s)

Decode a JSON document from *s* (a :class:`str` or :class:`unicode`
      beginning with a JSON document) and return a 2-tuple of the Python
      representation and the index in *s* where the document ended.

This can be used to decode a JSON document from a string that may have
      extraneous data at the end.

.. class:: JSONEncoder([skipkeys[, ensure_ascii[, check_circular[, allow_nan[, sort_keys[, indent[, separators[, encoding[, default]]]]]]]]])

Extensible JSON encoder for Python data structures.

Supports the following objects and types by default:

.. _py-to-json-table:

To extend this to recognize other objects, subclass and implement a
   :meth:`default` method with another method that returns a serializable object
   for ``o`` if possible, otherwise it should call the superclass implementation
   (to raise :exc:`TypeError`).

If *skipkeys* is false (the default), then it is a :exc:`TypeError` to
   attempt encoding of keys that are not str, int, long, float or ``None``.  If
   *skipkeys* is true, such items are simply skipped.

If *ensure_ascii* is true (the default), all non-ASCII characters in the
   output are escaped with ``\uXXXX`` sequences, and the results are
   :class:`str` instances consisting of ASCII characters only. If
   *ensure_ascii* is false, a result may be a :class:`unicode`
   instance. This usually happens if the input contains unicode strings or the
   *encoding* parameter is used.

If *check_circular* is true (the default), then lists, dicts, and custom
   encoded objects will be checked for circular references during encoding to
   prevent an infinite recursion (which would cause an :exc:`OverflowError`).
   Otherwise, no such check takes place.

If *allow_nan* is true (the default), then ``NaN``, ``Infinity``, and
   ``-Infinity`` will be encoded as such.  This behavior is not JSON
   specification compliant, but is consistent with most JavaScript based
   encoders and decoders.  Otherwise, it will be a :exc:`ValueError` to encode
   such floats.

If *sort_keys* is true (default: ``False``), then the output of dictionaries
   will be sorted by key; this is useful for regression tests to ensure that
   JSON serializations can be compared on a day-to-day basis.

If *indent* is a non-negative integer (it is ``None`` by default), then JSON
   array elements and object members will be pretty-printed with that indent
   level.  An indent level of 0 will only insert newlines.  ``None`` is the most
   compact representation.

.. note::

Since the default item separator is ``', '``,  the output might include
      trailing whitespace when *indent* is specified.  You can use
      ``separators=(',', ': ')`` to avoid this.

If *encoding* is not ``None``, then all input strings will be transformed
   into unicode using that encoding prior to JSON-encoding.  The default is
   UTF-8.

.. method:: default(o)

Implement this method in a subclass such that it returns a serializable
      object for *o*, or calls the base implementation (to raise a
      :exc:`TypeError`).

For example, to support arbitrary iterators, you could implement default
      like this::

def default(self, o):
            try:
                iterable = iter(o)
            except TypeError:
                pass
            else:
                return list(iterable)
            # Let the base class default method raise the TypeError
            return JSONEncoder.default(self, o)

.. method:: encode(o)

Return a JSON string representation of a Python data structure, *o*.  For
      example::

>>> JSONEncoder().encode({"foo": ["bar", "baz"]})
        '{"foo": ["bar", "baz"]}'

.. method:: iterencode(o)

Encode the given object, *o*, and yield each string representation as
      available.  For example::

for chunk in JSONEncoder().iterencode(bigobject):
                mysocket.write(chunk)

Standard Compliance and Interoperability
----------------------------------------

The JSON format is specified by :rfc:`7159` and by
`ECMA-404 <http://www.ecma-international.org/publications/standards/Ecma-404.htm>`_.
This section details this module's level of compliance with the RFC.
For simplicity, :class:`JSONEncoder` and :class:`JSONDecoder` subclasses, and
parameters other than those explicitly mentioned, are not considered.

This module does not comply with the RFC in a strict fashion, implementing some
extensions that are valid JavaScript but not valid JSON.  In particular:

- Infinite and NaN number values are accepted and output;
- Repeated names within an object are accepted, and only the value of the last
  name-value pair is used.

Since the RFC permits RFC-compliant parsers to accept input texts that are not
RFC-compliant, this module's deserializer is technically RFC-compliant under
default settings.

Character Encodings
^^^^^^^^^^^^^^^^^^^

The RFC requires that JSON be represented using either UTF-8, UTF-16, or
UTF-32, with UTF-8 being the recommended default for maximum interoperability.
Accordingly, this module uses UTF-8 as the default for its *encoding* parameter.

This module's deserializer only directly works with ASCII-compatible encodings;
UTF-16, UTF-32, and other ASCII-incompatible encodings require the use of
workarounds described in the documentation for the deserializer's *encoding*
parameter.

As permitted, though not required, by the RFC, this module's serializer sets
*ensure_ascii=True* by default, thus escaping the output so that the resulting
strings only contain ASCII characters.

The RFC prohibits adding a byte order mark (BOM) to the start of a JSON text,
and this module's serializer does not add a BOM to its output.
The RFC permits, but does not require, JSON deserializers to ignore an initial
BOM in their input.  This module's deserializer raises a :exc:`ValueError`
when an initial BOM is present.

The RFC does not explicitly forbid JSON strings which contain byte sequences
that don't correspond to valid Unicode characters (e.g. unpaired UTF-16
surrogates), but it does note that they may cause interoperability problems.
By default, this module accepts and outputs (when present in the original
:class:`str`) code points for such sequences.

Infinite and NaN Number Values
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The RFC does not permit the representation of infinite or NaN number values.
Despite that, by default, this module accepts and outputs ``Infinity``,
``-Infinity``, and ``NaN`` as if they were valid JSON number literal values::

>>> # Neither of these calls raises an exception, but the results are not valid JSON
   >>> json.dumps(float('-inf'))
   '-Infinity'
   >>> json.dumps(float('nan'))
   'NaN'
   >>> # Same when deserializing
   >>> json.loads('-Infinity')
   -inf
   >>> json.loads('NaN')
   nan

In the serializer, the *allow_nan* parameter can be used to alter this
behavior.  In the deserializer, the *parse_constant* parameter can be used to
alter this behavior.

Repeated Names Within an Object
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The RFC specifies that the names within a JSON object should be unique, but
does not mandate how repeated names in JSON objects should be handled.  By
default, this module does not raise an exception; instead, it ignores all but
the last name-value pair for a given name::

>>> weird_json = '{"x": 1, "x": 2, "x": 3}'
   >>> json.loads(weird_json)
   {u'x': 3}

The *object_pairs_hook* parameter can be used to alter this behavior.

Top-level Non-Object, Non-Array Values
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The old version of JSON specified by the obsolete :rfc:`4627` required that
the top-level value of a JSON text must be either a JSON object or array
(Python :class:`dict` or :class:`list`), and could not be a JSON null,
boolean, number, or string value.  :rfc:`7159` removed that restriction, and
this module does not and has never implemented that restriction in either its
serializer or its deserializer.

Regardless, for maximum interoperability, you may wish to voluntarily adhere
to the restriction yourself.

Implementation Limitations
^^^^^^^^^^^^^^^^^^^^^^^^^^

Some JSON deserializer implementations may set limits on:

* the size of accepted JSON texts
* the maximum level of nesting of JSON objects and arrays
* the range and precision of JSON numbers
* the content and maximum length of JSON strings

This module does not impose any such limits beyond those of the relevant
Python datatypes themselves or the Python interpreter itself.

When serializing to JSON, beware any such limitations in applications that may
consume your JSON.  In particular, it is common for JSON numbers to be
deserialized into IEEE 754 double precision numbers and thus subject to that
representation's range and precision limitations.  This is especially relevant
when serializing Python :class:`int` values of extremely large magnitude, or
when serializing instances of "exotic" numerical types such as
:class:`decimal.Decimal`.

.. rubric:: Footnotes

.. [#rfc-errata] As noted in `the errata for RFC 7159
   <https://www.rfc-editor.org/errata_search.php?rfc=7159>`_,
   JSON permits literal U+2028 (LINE SEPARATOR) and
   U+2029 (PARAGRAPH SEPARATOR) characters in strings, whereas JavaScript
   (as of ECMAScript Edition 5.1) does not.

:mod:`json` --- JSON encoder and decoder ======================================== .. module:: json :synopsis: Encode and decode the JSON format. .. moduleauthor:: Bob Ippolito .. sectionauthor:: Bob Ippolito .. versionadded:: 2.6 `JSON (JavaScript Object Notation) `_, specified by :rfc:`7159` (which obsoletes :rfc:`4627`) and by `ECMA-404 `_, is a lightweight data interchange format inspired by `JavaScript `_ object literal syntax (although it is not a strict subset of JavaScript [#rfc-errata]_ ). :mod:`json` exposes an API familiar to users of the standard library :mod:`marshal` and :mod:`pickle` modules. Encoding basic Python object hierarchies:: >>> import json >>> json.dumps(['foo', {'bar': ('baz', None, 1.0, 2)}]) '["foo", {"bar": ["baz", null, 1.0, 2]}]' >>> print json.dumps("\"foo\bar") "\"foo\bar" >>> print json.dumps(u'\u1234') "\u1234" >>> print json.dumps('\\') "\\" >>> print json.dumps({"c": 0, "b": 0, "a": 0}, sort_keys=True) {"a": 0, "b": 0, "c": 0} >>> from StringIO import StringIO >>> io = StringIO() >>> json.dump(['streaming API'], io) >>> io.getvalue() '["streaming API"]' Compact encoding:: >>> import json >>> json.dumps([1,2,3,{'4': 5, '6': 7}], separators=(',',':')) '[1,2,3,{"4":5,"6":7}]' Pretty printing:: >>> import json >>> print json.dumps({'4': 5, '6': 7}, sort_keys=True, ... indent=4, separators=(',', ': ')) { "4": 5, "6": 7 } Decoding JSON:: >>> import json >>> json.loads('["foo", {"bar":["baz", null, 1.0, 2]}]') [u'foo', {u'bar': [u'baz', None, 1.0, 2]}] >>> json.loads('"\\"foo\\bar"') u'"foo\x08ar' >>> from StringIO import StringIO >>> io = StringIO('["streaming API"]') >>> json.load(io) [u'streaming API'] Specializing JSON object decoding:: >>> import json >>> def as_complex(dct): ... if '__complex__' in dct: ... return complex(dct['real'], dct['imag']) ... return dct ... >>> json.loads('{"__complex__": true, "real": 1, "imag": 2}', ... object_hook=as_complex) (1+2j) >>> import decimal >>> json.loads('1.1', parse_float=decimal.Decimal) Decimal('1.1') Extending :class:`JSONEncoder`:: >>> import json >>> class ComplexEncoder(json.JSONEncoder): ... def default(self, obj): ... if isinstance(obj, complex): ... return [obj.real, obj.imag] ... # Let the base class default method raise the TypeError ... return json.JSONEncoder.default(self, obj) ... >>> json.dumps(2 + 1j, cls=ComplexEncoder) '[2.0, 1.0]' >>> ComplexEncoder().encode(2 + 1j) '[2.0, 1.0]' >>> list(ComplexEncoder().iterencode(2 + 1j)) ['[', '2.0', ', ', '1.0', ']'] .. highlight:: none Using :mod:`json.tool` from the shell to validate and pretty-print:: $ echo '{"json":"obj"}' | python -m json.tool { "json": "obj" } $ echo '{1.2:3.4}' | python -mjson.tool Expecting property name enclosed in double quotes: line 1 column 2 (char 1) .. highlight:: python .. note:: JSON is a subset of `YAML `_ 1.2. The JSON produced by this module's default settings (in particular, the default *separators* value) is also a subset of YAML 1.0 and 1.1. This module can thus also be used as a YAML serializer. Basic Usage ----------- .. function:: dump(obj, fp, skipkeys=False, ensure_ascii=True, \ check_circular=True, allow_nan=True, cls=None, \ indent=None, separators=None, encoding="utf-8", \ default=None, sort_keys=False, **kw) Serialize *obj* as a JSON formatted stream to *fp* (a ``.write()``-supporting :term:`file-like object`) using this :ref:`conversion table `. If *skipkeys* is true (default: ``False``), then dict keys that are not of a basic type (:class:`str`, :class:`unicode`, :class:`int`, :class:`long`, :class:`float`, :class:`bool`, ``None``) will be skipped instead of raising a :exc:`TypeError`. If *ensure_ascii* is true (the default), all non-ASCII characters in the output are escaped with ``\uXXXX`` sequences, and the result is a :class:`str` instance consisting of ASCII characters only. If *ensure_ascii* is false, some chunks written to *fp* may be :class:`unicode` instances. This usually happens because the input contains unicode strings or the *encoding* parameter is used. Unless ``fp.write()`` explicitly understands :class:`unicode` (as in :func:`codecs.getwriter`) this is likely to cause an error. If *check_circular* is false (default: ``True``), then the circular reference check for container types will be skipped and a circular reference will result in an :exc:`OverflowError` (or worse). If *allow_nan* is false (default: ``True``), then it will be a :exc:`ValueError` to serialize out of range :class:`float` values (``nan``, ``inf``, ``-inf``) in strict compliance of the JSON specification. If *allow_nan* is true, their JavaScript equivalents (``NaN``, ``Infinity``, ``-Infinity``) will be used. If *indent* is a non-negative integer, then JSON array elements and object members will be pretty-printed with that indent level. An indent level of 0, or negative, will only insert newlines. ``None`` (the default) selects the most compact representation. .. note:: Since the default item separator is ``', '``, the output might include trailing whitespace when *indent* is specified. You can use ``separators=(',', ': ')`` to avoid this. If specified, *separators* should be an ``(item_separator, key_separator)`` tuple. By default, ``(', ', ': ')`` are used. To get the most compact JSON representation, you should specify ``(',', ':')`` to eliminate whitespace. *encoding* is the character encoding for str instances, default is UTF-8. If specified, *default* should be a function that gets called for objects that can't otherwise be serialized. It should return a JSON encodable version of the object or raise a :exc:`TypeError`. If not specified, :exc:`TypeError` is raised. If *sort_keys* is true (default: ``False``), then the output of dictionaries will be sorted by key. To use a custom :class:`JSONEncoder` subclass (e.g. one that overrides the :meth:`default` method to serialize additional types), specify it with the *cls* kwarg; otherwise :class:`JSONEncoder` is used. .. note:: Unlike :mod:`pickle` and :mod:`marshal`, JSON is not a framed protocol so trying to serialize more objects with repeated calls to :func:`dump` and the same *fp* will result in an invalid JSON file. .. function:: dumps(obj, skipkeys=False, ensure_ascii=True, \ check_circular=True, allow_nan=True, cls=None, \ indent=None, separators=None, encoding="utf-8", \ default=None, sort_keys=False, **kw) Serialize *obj* to a JSON formatted :class:`str` using this :ref:`conversion table `. If *ensure_ascii* is false, the result may contain non-ASCII characters and the return value may be a :class:`unicode` instance. The arguments have the same meaning as in :func:`dump`. .. note:: Keys in key/value pairs of JSON are always of the type :class:`str`. When a dictionary is converted into JSON, all the keys of the dictionary are coerced to strings. As a result of this, if a dictionary is converted into JSON and then back into a dictionary, the dictionary may not equal the original one. That is, ``loads(dumps(x)) != x`` if x has non-string keys. .. function:: load(fp[, encoding[, cls[, object_hook[, parse_float[, parse_int[, parse_constant[, object_pairs_hook[, **kw]]]]]]]]) Deserialize *fp* (a ``.read()``-supporting :term:`file-like object` containing a JSON document) to a Python object using this :ref:`conversion table `. If the contents of *fp* are encoded with an ASCII based encoding other than UTF-8 (e.g. latin-1), then an appropriate *encoding* name must be specified. Encodings that are not ASCII based (such as UCS-2) are not allowed, and should be wrapped with ``codecs.getreader(encoding)(fp)``, or simply decoded to a :class:`unicode` object and passed to :func:`loads`. *object_hook* is an optional function that will be called with the result of any object literal decoded (a :class:`dict`). The return value of *object_hook* will be used instead of the :class:`dict`. This feature can be used to implement custom decoders (e.g. `JSON-RPC `_ class hinting). *object_pairs_hook* is an optional function that will be called with the result of any object literal decoded with an ordered list of pairs. The return value of *object_pairs_hook* will be used instead of the :class:`dict`. This feature can be used to implement custom decoders that rely on the order that the key and value pairs are decoded (for example, :func:`collections.OrderedDict` will remember the order of insertion). If *object_hook* is also defined, the *object_pairs_hook* takes priority. .. versionchanged:: 2.7 Added support for *object_pairs_hook*. *parse_float*, if specified, will be called with the string of every JSON float to be decoded. By default, this is equivalent to ``float(num_str)``. This can be used to use another datatype or parser for JSON floats (e.g. :class:`decimal.Decimal`). *parse_int*, if specified, will be called with the string of every JSON int to be decoded. By default, this is equivalent to ``int(num_str)``. This can be used to use another datatype or parser for JSON integers (e.g. :class:`float`). *parse_constant*, if specified, will be called with one of the following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``. This can be used to raise an exception if invalid JSON numbers are encountered. .. versionchanged:: 2.7 *parse_constant* doesn't get called on 'null', 'true', 'false' anymore. To use a custom :class:`JSONDecoder` subclass, specify it with the ``cls`` kwarg; otherwise :class:`JSONDecoder` is used. Additional keyword arguments will be passed to the constructor of the class. .. function:: loads(s[, encoding[, cls[, object_hook[, parse_float[, parse_int[, parse_constant[, object_pairs_hook[, **kw]]]]]]]]) Deserialize *s* (a :class:`str` or :class:`unicode` instance containing a JSON document) to a Python object using this :ref:`conversion table `. If *s* is a :class:`str` instance and is encoded with an ASCII based encoding other than UTF-8 (e.g. latin-1), then an appropriate *encoding* name must be specified. Encodings that are not ASCII based (such as UCS-2) are not allowed and should be decoded to :class:`unicode` first. The other arguments have the same meaning as in :func:`load`. Encoders and Decoders --------------------- .. class:: JSONDecoder([encoding[, object_hook[, parse_float[, parse_int[, parse_constant[, strict[, object_pairs_hook]]]]]]]) Simple JSON decoder. Performs the following translations in decoding by default: .. _json-to-py-table: +---------------+-------------------+ | JSON | Python | +===============+===================+ | object | dict | +---------------+-------------------+ | array | list | +---------------+-------------------+ | string | unicode | +---------------+-------------------+ | number (int) | int, long | +---------------+-------------------+ | number (real) | float | +---------------+-------------------+ | true | True | +---------------+-------------------+ | false | False | +---------------+-------------------+ | null | None | +---------------+-------------------+ It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as their corresponding ``float`` values, which is outside the JSON spec. *encoding* determines the encoding used to interpret any :class:`str` objects decoded by this instance (UTF-8 by default). It has no effect when decoding :class:`unicode` objects. Note that currently only encodings that are a superset of ASCII work, strings of other encodings should be passed in as :class:`unicode`. *object_hook*, if specified, will be called with the result of every JSON object decoded and its return value will be used in place of the given :class:`dict`. This can be used to provide custom deserializations (e.g. to support JSON-RPC class hinting). *object_pairs_hook*, if specified will be called with the result of every JSON object decoded with an ordered list of pairs. The return value of *object_pairs_hook* will be used instead of the :class:`dict`. This feature can be used to implement custom decoders that rely on the order that the key and value pairs are decoded (for example, :func:`collections.OrderedDict` will remember the order of insertion). If *object_hook* is also defined, the *object_pairs_hook* takes priority. .. versionchanged:: 2.7 Added support for *object_pairs_hook*. *parse_float*, if specified, will be called with the string of every JSON float to be decoded. By default, this is equivalent to ``float(num_str)``. This can be used to use another datatype or parser for JSON floats (e.g. :class:`decimal.Decimal`). *parse_int*, if specified, will be called with the string of every JSON int to be decoded. By default, this is equivalent to ``int(num_str)``. This can be used to use another datatype or parser for JSON integers (e.g. :class:`float`). *parse_constant*, if specified, will be called with one of the following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``. This can be used to raise an exception if invalid JSON numbers are encountered. If *strict* is false (``True`` is the default), then control characters will be allowed inside strings. Control characters in this context are those with character codes in the 0--31 range, including ``'\t'`` (tab), ``'\n'``, ``'\r'`` and ``'\0'``. If the data being deserialized is not a valid JSON document, a :exc:`ValueError` will be raised. .. method:: decode(s) Return the Python representation of *s* (a :class:`str` or :class:`unicode` instance containing a JSON document). .. method:: raw_decode(s) Decode a JSON document from *s* (a :class:`str` or :class:`unicode` beginning with a JSON document) and return a 2-tuple of the Python representation and the index in *s* where the document ended. This can be used to decode a JSON document from a string that may have extraneous data at the end. .. class:: JSONEncoder([skipkeys[, ensure_ascii[, check_circular[, allow_nan[, sort_keys[, indent[, separators[, encoding[, default]]]]]]]]]) Extensible JSON encoder for Python data structures. Supports the following objects and types by default: .. _py-to-json-table: +-------------------+---------------+ | Python | JSON | +===================+===============+ | dict | object | +-------------------+---------------+ | list, tuple | array | +-------------------+---------------+ | str, unicode | string | +-------------------+---------------+ | int, long, float | number | +-------------------+---------------+ | True | true | +-------------------+---------------+ | False | false | +-------------------+---------------+ | None | null | +-------------------+---------------+ To extend this to recognize other objects, subclass and implement a :meth:`default` method with another method that returns a serializable object for ``o`` if possible, otherwise it should call the superclass implementation (to raise :exc:`TypeError`). If *skipkeys* is false (the default), then it is a :exc:`TypeError` to attempt encoding of keys that are not str, int, long, float or ``None``. If *skipkeys* is true, such items are simply skipped. If *ensure_ascii* is true (the default), all non-ASCII characters in the output are escaped with ``\uXXXX`` sequences, and the results are :class:`str` instances consisting of ASCII characters only. If *ensure_ascii* is false, a result may be a :class:`unicode` instance. This usually happens if the input contains unicode strings or the *encoding* parameter is used. If *check_circular* is true (the default), then lists, dicts, and custom encoded objects will be checked for circular references during encoding to prevent an infinite recursion (which would cause an :exc:`OverflowError`). Otherwise, no such check takes place. If *allow_nan* is true (the default), then ``NaN``, ``Infinity``, and ``-Infinity`` will be encoded as such. This behavior is not JSON specification compliant, but is consistent with most JavaScript based encoders and decoders. Otherwise, it will be a :exc:`ValueError` to encode such floats. If *sort_keys* is true (default: ``False``), then the output of dictionaries will be sorted by key; this is useful for regression tests to ensure that JSON serializations can be compared on a day-to-day basis. If *indent* is a non-negative integer (it is ``None`` by default), then JSON array elements and object members will be pretty-printed with that indent level. An indent level of 0 will only insert newlines. ``None`` is the most compact representation. .. note:: Since the default item separator is ``', '``, the output might include trailing whitespace when *indent* is specified. You can use ``separators=(',', ': ')`` to avoid this. If specified, *separators* should be an ``(item_separator, key_separator)`` tuple. By default, ``(', ', ': ')`` are used. To get the most compact JSON representation, you should specify ``(',', ':')`` to eliminate whitespace. If specified, *default* should be a function that gets called for objects that can't otherwise be serialized. It should return a JSON encodable version of the object or raise a :exc:`TypeError`. If not specified, :exc:`TypeError` is raised. If *encoding* is not ``None``, then all input strings will be transformed into unicode using that encoding prior to JSON-encoding. The default is UTF-8. .. method:: default(o) Implement this method in a subclass such that it returns a serializable object for *o*, or calls the base implementation (to raise a :exc:`TypeError`). For example, to support arbitrary iterators, you could implement default like this:: def default(self, o): try: iterable = iter(o) except TypeError: pass else: return list(iterable) # Let the base class default method raise the TypeError return JSONEncoder.default(self, o) .. method:: encode(o) Return a JSON string representation of a Python data structure, *o*. For example:: >>> JSONEncoder().encode({"foo": ["bar", "baz"]}) '{"foo": ["bar", "baz"]}' .. method:: iterencode(o) Encode the given object, *o*, and yield each string representation as available. For example:: for chunk in JSONEncoder().iterencode(bigobject): mysocket.write(chunk) Standard Compliance and Interoperability ---------------------------------------- The JSON format is specified by :rfc:`7159` and by `ECMA-404 `_. This section details this module's level of compliance with the RFC. For simplicity, :class:`JSONEncoder` and :class:`JSONDecoder` subclasses, and parameters other than those explicitly mentioned, are not considered. This module does not comply with the RFC in a strict fashion, implementing some extensions that are valid JavaScript but not valid JSON. In particular: - Infinite and NaN number values are accepted and output; - Repeated names within an object are accepted, and only the value of the last name-value pair is used. Since the RFC permits RFC-compliant parsers to accept input texts that are not RFC-compliant, this module's deserializer is technically RFC-compliant under default settings. Character Encodings ^^^^^^^^^^^^^^^^^^^ The RFC requires that JSON be represented using either UTF-8, UTF-16, or UTF-32, with UTF-8 being the recommended default for maximum interoperability. Accordingly, this module uses UTF-8 as the default for its *encoding* parameter. This module's deserializer only directly works with ASCII-compatible encodings; UTF-16, UTF-32, and other ASCII-incompatible encodings require the use of workarounds described in the documentation for the deserializer's *encoding* parameter. As permitted, though not required, by the RFC, this module's serializer sets *ensure_ascii=True* by default, thus escaping the output so that the resulting strings only contain ASCII characters. The RFC prohibits adding a byte order mark (BOM) to the start of a JSON text, and this module's serializer does not add a BOM to its output. The RFC permits, but does not require, JSON deserializers to ignore an initial BOM in their input. This module's deserializer raises a :exc:`ValueError` when an initial BOM is present. The RFC does not explicitly forbid JSON strings which contain byte sequences that don't correspond to valid Unicode characters (e.g. unpaired UTF-16 surrogates), but it does note that they may cause interoperability problems. By default, this module accepts and outputs (when present in the original :class:`str`) code points for such sequences. Infinite and NaN Number Values ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The RFC does not permit the representation of infinite or NaN number values. Despite that, by default, this module accepts and outputs ``Infinity``, ``-Infinity``, and ``NaN`` as if they were valid JSON number literal values:: >>> # Neither of these calls raises an exception, but the results are not valid JSON >>> json.dumps(float('-inf')) '-Infinity' >>> json.dumps(float('nan')) 'NaN' >>> # Same when deserializing >>> json.loads('-Infinity') -inf >>> json.loads('NaN') nan In the serializer, the *allow_nan* parameter can be used to alter this behavior. In the deserializer, the *parse_constant* parameter can be used to alter this behavior. Repeated Names Within an Object ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The RFC specifies that the names within a JSON object should be unique, but does not mandate how repeated names in JSON objects should be handled. By default, this module does not raise an exception; instead, it ignores all but the last name-value pair for a given name:: >>> weird_json = '{"x": 1, "x": 2, "x": 3}' >>> json.loads(weird_json) {u'x': 3} The *object_pairs_hook* parameter can be used to alter this behavior. Top-level Non-Object, Non-Array Values ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The old version of JSON specified by the obsolete :rfc:`4627` required that the top-level value of a JSON text must be either a JSON object or array (Python :class:`dict` or :class:`list`), and could not be a JSON null, boolean, number, or string value. :rfc:`7159` removed that restriction, and this module does not and has never implemented that restriction in either its serializer or its deserializer. Regardless, for maximum interoperability, you may wish to voluntarily adhere to the restriction yourself. Implementation Limitations ^^^^^^^^^^^^^^^^^^^^^^^^^^ Some JSON deserializer implementations may set limits on: * the size of accepted JSON texts * the maximum level of nesting of JSON objects and arrays * the range and precision of JSON numbers * the content and maximum length of JSON strings This module does not impose any such limits beyond those of the relevant Python datatypes themselves or the Python interpreter itself. When serializing to JSON, beware any such limitations in applications that may consume your JSON. In particular, it is common for JSON numbers to be deserialized into IEEE 754 double precision numbers and thus subject to that representation's range and precision limitations. This is especially relevant when serializing Python :class:`int` values of extremely large magnitude, or when serializing instances of "exotic" numerical types such as :class:`decimal.Decimal`. .. rubric:: Footnotes .. [#rfc-errata] As noted in `the errata for RFC 7159 `_, JSON permits literal U+2028 (LINE SEPARATOR) and U+2029 (PARAGRAPH SEPARATOR) characters in strings, whereas JavaScript (as of ECMAScript Edition 5.1) does not.