FM / library

/usr/share/doc/python2-docs/html/_sources/library/

/usr/share/doc/python2-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	14647	0644	edit dl rm
abc.rst.txt	7219	0644	edit dl rm
aepack.rst.txt	4257	0644	edit dl rm
aetools.rst.txt	3532	0644	edit dl rm
aetypes.rst.txt	4257	0644	edit dl rm
aifc.rst.txt	7086	0644	edit dl rm
al.rst.txt	5309	0644	edit dl rm
allos.rst.txt	695	0644	edit dl rm
anydbm.rst.txt	4111	0644	edit dl rm
archiving.rst.txt	424	0644	edit dl rm
argparse.rst.txt	74685	0644	edit dl rm
array.rst.txt	10524	0644	edit dl rm
ast.rst.txt	10111	0644	edit dl rm
asynchat.rst.txt	9206	0644	edit dl rm
asyncore.rst.txt	12937	0644	edit dl rm
atexit.rst.txt	3910	0644	edit dl rm
audioop.rst.txt	10395	0644	edit dl rm
autogil.rst.txt	1015	0644	edit dl rm
base64.rst.txt	6252	0644	edit dl rm
basehttpserver.rst.txt	10404	0644	edit dl rm
bastion.rst.txt	2611	0644	edit dl rm
bdb.rst.txt	12456	0644	edit dl rm
binascii.rst.txt	6508	0644	edit dl rm
binhex.rst.txt	1910	0644	edit dl rm
bisect.rst.txt	5415	0644	edit dl rm
bsddb.rst.txt	7575	0644	edit dl rm
bz2.rst.txt	8064	0644	edit dl rm
calendar.rst.txt	11282	0644	edit dl rm
carbon.rst.txt	15956	0644	edit dl rm
cd.rst.txt	11974	0644	edit dl rm
cgi.rst.txt	22853	0644	edit dl rm
cgihttpserver.rst.txt	2788	0644	edit dl rm
cgitb.rst.txt	2874	0644	edit dl rm
chunk.rst.txt	4955	0644	edit dl rm
cmath.rst.txt	7647	0644	edit dl rm
cmd.rst.txt	8565	0644	edit dl rm
code.rst.txt	7115	0644	edit dl rm
codecs.rst.txt	66966	0644	edit dl rm
codeop.rst.txt	3774	0644	edit dl rm
collections.rst.txt	41448	0644	edit dl rm
colorpicker.rst.txt	913	0644	edit dl rm
colorsys.rst.txt	1819	0644	edit dl rm
commands.rst.txt	2595	0644	edit dl rm
compileall.rst.txt	4678	0644	edit dl rm
compiler.rst.txt	37464	0644	edit dl rm
configparser.rst.txt	19607	0644	edit dl rm
constants.rst.txt	2328	0644	edit dl rm
contextlib.rst.txt	6012	0644	edit dl rm
cookie.rst.txt	9543	0644	edit dl rm
cookielib.rst.txt	27875	0644	edit dl rm
copy.rst.txt	3351	0644	edit dl rm
copy_reg.rst.txt	2329	0644	edit dl rm
crypt.rst.txt	2292	0644	edit dl rm
crypto.rst.txt	355	0644	edit dl rm
csv.rst.txt	22757	0644	edit dl rm
ctypes.rst.txt	90513	0644	edit dl rm
curses.ascii.rst.txt	9046	0644	edit dl rm
curses.panel.rst.txt	2740	0644	edit dl rm
curses.rst.txt	74877	0644	edit dl rm
custominterp.rst.txt	570	0644	edit dl rm
datatypes.rst.txt	864	0644	edit dl rm
datetime.rst.txt	74679	0644	edit dl rm
dbhash.rst.txt	3865	0644	edit dl rm
dbm.rst.txt	3117	0644	edit dl rm
debug.rst.txt	446	0644	edit dl rm
decimal.rst.txt	70926	0644	edit dl rm
development.rst.txt	640	0644	edit dl rm
difflib.rst.txt	30716	0644	edit dl rm
dircache.rst.txt	1813	0644	edit dl rm
dis.rst.txt	23248	0644	edit dl rm
distribution.rst.txt	426	0644	edit dl rm
distutils.rst.txt	1958	0644	edit dl rm
dl.rst.txt	3392	0644	edit dl rm
doctest.rst.txt	73985	0644	edit dl rm
docxmlrpcserver.rst.txt	3802	0644	edit dl rm
dumbdbm.rst.txt	2841	0644	edit dl rm
dummy_thread.rst.txt	1058	0644	edit dl rm
dummy_threading.rst.txt	799	0644	edit dl rm
easydialogs.rst.txt	10346	0644	edit dl rm
email-examples.rst.txt	1271	0644	edit dl rm
email.charset.rst.txt	9654	0644	edit dl rm
email.encoders.rst.txt	2376	0644	edit dl rm
email.errors.rst.txt	4006	0644	edit dl rm
email.generator.rst.txt	6132	0644	edit dl rm
email.header.rst.txt	7531	0644	edit dl rm
email.iterators.rst.txt	2421	0644	edit dl rm
email.message.rst.txt	25217	0644	edit dl rm
email.mime.rst.txt	9917	0644	edit dl rm
email.parser.rst.txt	10327	0644	edit dl rm
email.rst.txt	16111	0644	edit dl rm
email.utils.rst.txt	6475	0644	edit dl rm
ensurepip.rst.txt	5022	0644	edit dl rm
errno.rst.txt	6708	0644	edit dl rm
exceptions.rst.txt	18343	0644	edit dl rm
fcntl.rst.txt	7361	0644	edit dl rm
filecmp.rst.txt	5348	0644	edit dl rm
fileformats.rst.txt	302	0644	edit dl rm
fileinput.rst.txt	7417	0644	edit dl rm
filesys.rst.txt	806	0644	edit dl rm
fl.rst.txt	17646	0644	edit dl rm
fm.rst.txt	2699	0644	edit dl rm
fnmatch.rst.txt	3104	0644	edit dl rm
formatter.rst.txt	13245	0644	edit dl rm
fpectl.rst.txt	4171	0644	edit dl rm
fpformat.rst.txt	1747	0644	edit dl rm
fractions.rst.txt	5297	0644	edit dl rm
framework.rst.txt	11444	0644	edit dl rm
frameworks.rst.txt	378	0644	edit dl rm
ftplib.rst.txt	15720	0644	edit dl rm
functions.rst.txt	75554	0644	edit dl rm
functools.rst.txt	7448	0644	edit dl rm
future_builtins.rst.txt	2010	0644	edit dl rm
gc.rst.txt	9014	0644	edit dl rm
gdbm.rst.txt	4882	0644	edit dl rm
gensuitemodule.rst.txt	3113	0644	edit dl rm
getopt.rst.txt	6670	0644	edit dl rm
getpass.rst.txt	1876	0644	edit dl rm
gettext.rst.txt	29040	0644	edit dl rm
gl.rst.txt	6009	0644	edit dl rm
glob.rst.txt	2414	0644	edit dl rm
grp.rst.txt	2256	0644	edit dl rm
gzip.rst.txt	4828	0644	edit dl rm
hashlib.rst.txt	7379	0644	edit dl rm
heapq.rst.txt	13185	0644	edit dl rm
hmac.rst.txt	3073	0644	edit dl rm
hotshot.rst.txt	4289	0644	edit dl rm
htmllib.rst.txt	7379	0644	edit dl rm
htmlparser.rst.txt	11640	0644	edit dl rm
httplib.rst.txt	37454	0644	edit dl rm
i18n.rst.txt	409	0644	edit dl rm
ic.rst.txt	5005	0644	edit dl rm
idle.rst.txt	22182	0644	edit dl rm
imageop.rst.txt	4001	0644	edit dl rm
imaplib.rst.txt	17221	0644	edit dl rm
imgfile.rst.txt	2765	0644	edit dl rm
imghdr.rst.txt	2635	0644	edit dl rm
imp.rst.txt	12593	0644	edit dl rm
importlib.rst.txt	1126	0644	edit dl rm
imputil.rst.txt	7023	0644	edit dl rm
index.rst.txt	2287	0644	edit dl rm
inspect.rst.txt	28151	0644	edit dl rm
internet.rst.txt	950	0644	edit dl rm
intro.rst.txt	2803	0644	edit dl rm
io.rst.txt	39015	0644	edit dl rm
ipc.rst.txt	630	0644	edit dl rm
itertools.rst.txt	36324	0644	edit dl rm
jpeg.rst.txt	3858	0644	edit dl rm
json.rst.txt	25545	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	523	0644	edit dl rm
linecache.rst.txt	1887	0644	edit dl rm
locale.rst.txt	24975	0644	edit dl rm
logging.config.rst.txt	31560	0644	edit dl rm
logging.handlers.rst.txt	28153	0644	edit dl rm
logging.rst.txt	46882	0644	edit dl rm
mac.rst.txt	791	0644	edit dl rm
macos.rst.txt	3824	0644	edit dl rm
macosa.rst.txt	3964	0644	edit dl rm
macostools.rst.txt	4017	0644	edit dl rm
macpath.rst.txt	650	0644	edit dl rm
mailbox.rst.txt	68129	0644	edit dl rm
mailcap.rst.txt	3675	0644	edit dl rm
markup.rst.txt	1249	0644	edit dl rm
marshal.rst.txt	5689	0644	edit dl rm
math.rst.txt	10920	0644	edit dl rm
md5.rst.txt	2815	0644	edit dl rm
mhlib.rst.txt	3966	0644	edit dl rm
mimetools.rst.txt	4504	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
mimewriter.rst.txt	3360	0644	edit dl rm
mimify.rst.txt	3519	0644	edit dl rm
miniaeframe.rst.txt	2564	0644	edit dl rm
misc.rst.txt	248	0644	edit dl rm
mm.rst.txt	447	0644	edit dl rm
mmap.rst.txt	10481	0644	edit dl rm
modulefinder.rst.txt	3380	0644	edit dl rm
modules.rst.txt	382	0644	edit dl rm
msilib.rst.txt	19062	0644	edit dl rm
msvcrt.rst.txt	4346	0644	edit dl rm
multifile.rst.txt	6613	0644	edit dl rm
multiprocessing.rst.txt	92621	0644	edit dl rm
mutex.rst.txt	1939	0644	edit dl rm
netdata.rst.txt	432	0644	edit dl rm
netrc.rst.txt	3119	0644	edit dl rm
new.rst.txt	2653	0644	edit dl rm
nis.rst.txt	2108	0644	edit dl rm
nntplib.rst.txt	14531	0644	edit dl rm
numbers.rst.txt	8007	0644	edit dl rm
numeric.rst.txt	751	0644	edit dl rm
operator.rst.txt	22092	0644	edit dl rm
optparse.rst.txt	77101	0644	edit dl rm
os.path.rst.txt	13094	0644	edit dl rm
os.rst.txt	82580	0644	edit dl rm
ossaudiodev.rst.txt	17309	0644	edit dl rm
othergui.rst.txt	2721	0644	edit dl rm
parser.rst.txt	15385	0644	edit dl rm
pdb.rst.txt	16043	0644	edit dl rm
persistence.rst.txt	826	0644	edit dl rm
pickle.rst.txt	37262	0644	edit dl rm
pickletools.rst.txt	1997	0644	edit dl rm
pipes.rst.txt	3786	0644	edit dl rm
pkgutil.rst.txt	7714	0644	edit dl rm
platform.rst.txt	9554	0644	edit dl rm
plistlib.rst.txt	4134	0644	edit dl rm
popen2.rst.txt	7022	0644	edit dl rm
poplib.rst.txt	6220	0644	edit dl rm
posix.rst.txt	3630	0644	edit dl rm
posixfile.rst.txt	7200	0644	edit dl rm
pprint.rst.txt	9071	0644	edit dl rm
profile.rst.txt	28666	0644	edit dl rm
pty.rst.txt	1762	0644	edit dl rm
pwd.rst.txt	2725	0644	edit dl rm
pyclbr.rst.txt	3296	0644	edit dl rm
pydoc.rst.txt	4083	0644	edit dl rm
pyexpat.rst.txt	28891	0644	edit dl rm
python.rst.txt	514	0644	edit dl rm
py_compile.rst.txt	2479	0644	edit dl rm
queue.rst.txt	7034	0644	edit dl rm
quopri.rst.txt	2670	0644	edit dl rm
random.rst.txt	13319	0644	edit dl rm
re.rst.txt	55102	0644	edit dl rm
readline.rst.txt	10513	0644	edit dl rm
repr.rst.txt	4718	0644	edit dl rm
resource.rst.txt	9595	0644	edit dl rm
restricted.rst.txt	3327	0644	edit dl rm
rexec.rst.txt	11742	0644	edit dl rm
rfc822.rst.txt	14037	0644	edit dl rm
rlcompleter.rst.txt	2494	0644	edit dl rm
robotparser.rst.txt	2190	0644	edit dl rm
runpy.rst.txt	6938	0644	edit dl rm
sched.rst.txt	4644	0644	edit dl rm
scrolledtext.rst.txt	1379	0644	edit dl rm
select.rst.txt	20705	0644	edit dl rm
sets.rst.txt	14973	0644	edit dl rm
sgi.rst.txt	322	0644	edit dl rm
sgmllib.rst.txt	10664	0644	edit dl rm
sha.rst.txt	2807	0644	edit dl rm
shelve.rst.txt	8319	0644	edit dl rm
shlex.rst.txt	11313	0644	edit dl rm
shutil.rst.txt	13491	0644	edit dl rm
signal.rst.txt	10719	0644	edit dl rm
simplehttpserver.rst.txt	4559	0644	edit dl rm
simplexmlrpcserver.rst.txt	10881	0644	edit dl rm
site.rst.txt	7880	0644	edit dl rm
smtpd.rst.txt	2464	0644	edit dl rm
smtplib.rst.txt	14906	0644	edit dl rm
sndhdr.rst.txt	1759	0644	edit dl rm
socket.rst.txt	40765	0644	edit dl rm
socketserver.rst.txt	22512	0644	edit dl rm
someos.rst.txt	599	0644	edit dl rm
spwd.rst.txt	2825	0644	edit dl rm
sqlite3.rst.txt	35448	0644	edit dl rm
ssl.rst.txt	76554	0644	edit dl rm
stat.rst.txt	7778	0644	edit dl rm
statvfs.rst.txt	1300	0644	edit dl rm
stdtypes.rst.txt	122668	0644	edit dl rm
string.rst.txt	44085	0644	edit dl rm
stringio.rst.txt	4166	0644	edit dl rm
stringprep.rst.txt	4238	0644	edit dl rm
strings.rst.txt	746	0644	edit dl rm
struct.rst.txt	17100	0644	edit dl rm
subprocess.rst.txt	33648	0644	edit dl rm
sun.rst.txt	249	0644	edit dl rm
sunau.rst.txt	7124	0644	edit dl rm
sunaudio.rst.txt	5849	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	5064	0644	edit dl rm
sys.rst.txt	47520	0644	edit dl rm
sysconfig.rst.txt	7639	0644	edit dl rm
syslog.rst.txt	3931	0644	edit dl rm
tabnanny.rst.txt	1999	0644	edit dl rm
tarfile.rst.txt	28214	0644	edit dl rm
telnetlib.rst.txt	7482	0644	edit dl rm
tempfile.rst.txt	10504	0644	edit dl rm
termios.rst.txt	3733	0644	edit dl rm
test.rst.txt	17659	0644	edit dl rm
textwrap.rst.txt	8552	0644	edit dl rm
thread.rst.txt	6588	0644	edit dl rm
threading.rst.txt	32468	0644	edit dl rm
time.rst.txt	26020	0644	edit dl rm
timeit.rst.txt	11598	0644	edit dl rm
tix.rst.txt	22693	0644	edit dl rm
tk.rst.txt	1612	0644	edit dl rm
tkinter.rst.txt	33456	0644	edit dl rm
token.rst.txt	2451	0644	edit dl rm
tokenize.rst.txt	5570	0644	edit dl rm
trace.rst.txt	6724	0644	edit dl rm
traceback.rst.txt	10711	0644	edit dl rm
ttk.rst.txt	57411	0644	edit dl rm
tty.rst.txt	1011	0644	edit dl rm
turtle.rst.txt	64097	0644	edit dl rm
types.rst.txt	6200	0644	edit dl rm
undoc.rst.txt	6550	0644	edit dl rm
unicodedata.rst.txt	5736	0644	edit dl rm
unittest.rst.txt	82952	0644	edit dl rm
unix.rst.txt	490	0644	edit dl rm
urllib.rst.txt	24960	0644	edit dl rm
urllib2.rst.txt	35211	0644	edit dl rm
urlparse.rst.txt	16071	0644	edit dl rm
user.rst.txt	2748	0644	edit dl rm
userdict.rst.txt	9290	0644	edit dl rm
uu.rst.txt	2369	0644	edit dl rm
uuid.rst.txt	8378	0644	edit dl rm
warnings.rst.txt	19815	0644	edit dl rm
wave.rst.txt	5047	0644	edit dl rm
weakref.rst.txt	12926	0644	edit dl rm
webbrowser.rst.txt	9863	0644	edit dl rm
whichdb.rst.txt	931	0644	edit dl rm
windows.rst.txt	273	0644	edit dl rm
winsound.rst.txt	5066	0644	edit dl rm
wsgiref.rst.txt	30567	0644	edit dl rm
xdrlib.rst.txt	8077	0644	edit dl rm
xml.dom.minidom.rst.txt	11208	0644	edit dl rm
xml.dom.pulldom.rst.txt	1571	0644	edit dl rm
xml.dom.rst.txt	40182	0644	edit dl rm
xml.etree.elementtree.rst.txt	35707	0644	edit dl rm
xml.rst.txt	6090	0644	edit dl rm
xml.sax.handler.rst.txt	15371	0644	edit dl rm
xml.sax.reader.rst.txt	12257	0644	edit dl rm
xml.sax.rst.txt	6460	0644	edit dl rm
xml.sax.utils.rst.txt	3560	0644	edit dl rm
xmlrpclib.rst.txt	22559	0644	edit dl rm
zipfile.rst.txt	18871	0644	edit dl rm
zipimport.rst.txt	5957	0644	edit dl rm
zlib.rst.txt	12766	0644	edit dl rm
_winreg.rst.txt	23305	0644	edit dl rm
__builtin__.rst.txt	1494	0644	edit dl rm
__future__.rst.txt	4952	0644	edit dl rm
__main__.rst.txt	535	0644	edit dl rm

Edit: /usr/share/doc/python2-docs/html/_sources/library/mailbox.rst.txt (68129B)

:mod:`mailbox` --- Manipulate mailboxes in various formats
==========================================================

.. module:: mailbox
   :synopsis: Manipulate mailboxes in various formats
.. moduleauthor:: Gregory K. Johnson <gkj@gregorykjohnson.com>
.. sectionauthor:: Gregory K. Johnson <gkj@gregorykjohnson.com>

This module defines two classes, :class:`Mailbox` and :class:`Message`, for
accessing and manipulating on-disk mailboxes and the messages they contain.
:class:`Mailbox` offers a dictionary-like mapping from keys to messages.
:class:`Message` extends the :mod:`email.message` module's
:class:`~email.message.Message` class with format-specific state and behavior.
Supported mailbox formats are
Maildir, mbox, MH, Babyl, and MMDF.

.. seealso::

Module :mod:`email`
      Represent and manipulate messages.

.. _mailbox-objects:

:class:`Mailbox` objects
------------------------

.. class:: Mailbox

A mailbox, which may be inspected and modified.

The :class:`Mailbox` class defines an interface and is not intended to be
   instantiated.  Instead, format-specific subclasses should inherit from
   :class:`Mailbox` and your code should instantiate a particular subclass.

The :class:`Mailbox` interface is dictionary-like, with small keys
   corresponding to messages. Keys are issued by the :class:`Mailbox` instance
   with which they will be used and are only meaningful to that :class:`Mailbox`
   instance. A key continues to identify a message even if the corresponding
   message is modified, such as by replacing it with another message.

Messages may be added to a :class:`Mailbox` instance using the set-like
   method :meth:`add` and removed using a ``del`` statement or the set-like
   methods :meth:`remove` and :meth:`discard`.

:class:`Mailbox` interface semantics differ from dictionary semantics in some
   noteworthy ways. Each time a message is requested, a new representation
   (typically a :class:`Message` instance) is generated based upon the current
   state of the mailbox. Similarly, when a message is added to a
   :class:`Mailbox` instance, the provided message representation's contents are
   copied. In neither case is a reference to the message representation kept by
   the :class:`Mailbox` instance.

The default :class:`Mailbox` iterator iterates over message representations,
   not keys as the default dictionary iterator does. Moreover, modification of a
   mailbox during iteration is safe and well-defined. Messages added to the
   mailbox after an iterator is created will not be seen by the
   iterator. Messages removed from the mailbox before the iterator yields them
   will be silently skipped, though using a key from an iterator may result in a
   :exc:`KeyError` exception if the corresponding message is subsequently
   removed.

.. warning::

Be very cautious when modifying mailboxes that might be simultaneously
      changed by some other process.  The safest mailbox format to use for such
      tasks is Maildir; try to avoid using single-file formats such as mbox for
      concurrent writing.  If you're modifying a mailbox, you *must* lock it by
      calling the :meth:`lock` and :meth:`unlock` methods *before* reading any
      messages in the file or making any changes by adding or deleting a
      message.  Failing to lock the mailbox runs the risk of losing messages or
      corrupting the entire mailbox.

:class:`Mailbox` instances have the following methods:

.. method:: add(message)

Add *message* to the mailbox and return the key that has been assigned to
      it.

Parameter *message* may be a :class:`Message` instance, an
      :class:`email.message.Message` instance, a string, or a file-like object
      (which should be open in text mode). If *message* is an instance of the
      appropriate format-specific :class:`Message` subclass (e.g., if it's an
      :class:`mboxMessage` instance and this is an :class:`mbox` instance), its
      format-specific information is used. Otherwise, reasonable defaults for
      format-specific information are used.

.. method:: remove(key)
               __delitem__(key)
               discard(key)

Delete the message corresponding to *key* from the mailbox.

If no such message exists, a :exc:`KeyError` exception is raised if the
      method was called as :meth:`remove` or :meth:`__delitem__` but no
      exception is raised if the method was called as :meth:`discard`. The
      behavior of :meth:`discard` may be preferred if the underlying mailbox
      format supports concurrent modification by other processes.

.. method:: __setitem__(key, message)

Replace the message corresponding to *key* with *message*. Raise a
      :exc:`KeyError` exception if no message already corresponds to *key*.

As with :meth:`add`, parameter *message* may be a :class:`Message`
      instance, an :class:`email.message.Message` instance, a string, or a
      file-like object (which should be open in text mode). If *message* is an
      instance of the appropriate format-specific :class:`Message` subclass
      (e.g., if it's an :class:`mboxMessage` instance and this is an
      :class:`mbox` instance), its format-specific information is
      used. Otherwise, the format-specific information of the message that
      currently corresponds to *key* is left unchanged.

.. method:: iterkeys()
               keys()

Return an iterator over all keys if called as :meth:`iterkeys` or return a
      list of keys if called as :meth:`keys`.

.. method:: itervalues()
               __iter__()
               values()

Return an iterator over representations of all messages if called as
      :meth:`itervalues` or :meth:`__iter__` or return a list of such
      representations if called as :meth:`values`. The messages are represented
      as instances of the appropriate format-specific :class:`Message` subclass
      unless a custom message factory was specified when the :class:`Mailbox`
      instance was initialized.

.. note::

The behavior of :meth:`__iter__` is unlike that of dictionaries, which
         iterate over keys.

.. method:: iteritems()
               items()

Return an iterator over (*key*, *message*) pairs, where *key* is a key and
      *message* is a message representation, if called as :meth:`iteritems` or
      return a list of such pairs if called as :meth:`items`. The messages are
      represented as instances of the appropriate format-specific
      :class:`Message` subclass unless a custom message factory was specified
      when the :class:`Mailbox` instance was initialized.

.. method:: get(key, default=None)
               __getitem__(key)

Return a representation of the message corresponding to *key*. If no such
      message exists, *default* is returned if the method was called as
      :meth:`get` and a :exc:`KeyError` exception is raised if the method was
      called as :meth:`__getitem__`. The message is represented as an instance
      of the appropriate format-specific :class:`Message` subclass unless a
      custom message factory was specified when the :class:`Mailbox` instance
      was initialized.

.. method:: get_message(key)

Return a representation of the message corresponding to *key* as an
      instance of the appropriate format-specific :class:`Message` subclass, or
      raise a :exc:`KeyError` exception if no such message exists.

.. method:: get_string(key)

Return a string representation of the message corresponding to *key*, or
      raise a :exc:`KeyError` exception if no such message exists.

.. method:: get_file(key)

Return a file-like representation of the message corresponding to *key*,
      or raise a :exc:`KeyError` exception if no such message exists. The
      file-like object behaves as if open in binary mode. This file should be
      closed once it is no longer needed.

.. note::

Unlike other representations of messages, file-like representations are
         not necessarily independent of the :class:`Mailbox` instance that
         created them or of the underlying mailbox. More specific documentation
         is provided by each subclass.

.. method:: has_key(key)
               __contains__(key)

Return ``True`` if *key* corresponds to a message, ``False`` otherwise.

.. method:: __len__()

Return a count of messages in the mailbox.

.. method:: clear()

Delete all messages from the mailbox.

.. method:: pop(key[, default])

Return a representation of the message corresponding to *key* and delete
      the message. If no such message exists, return *default* if it was
      supplied or else raise a :exc:`KeyError` exception. The message is
      represented as an instance of the appropriate format-specific
      :class:`Message` subclass unless a custom message factory was specified
      when the :class:`Mailbox` instance was initialized.

.. method:: popitem()

Return an arbitrary (*key*, *message*) pair, where *key* is a key and
      *message* is a message representation, and delete the corresponding
      message. If the mailbox is empty, raise a :exc:`KeyError` exception. The
      message is represented as an instance of the appropriate format-specific
      :class:`Message` subclass unless a custom message factory was specified
      when the :class:`Mailbox` instance was initialized.

.. method:: update(arg)

Parameter *arg* should be a *key*-to-*message* mapping or an iterable of
      (*key*, *message*) pairs. Updates the mailbox so that, for each given
      *key* and *message*, the message corresponding to *key* is set to
      *message* as if by using :meth:`__setitem__`. As with :meth:`__setitem__`,
      each *key* must already correspond to a message in the mailbox or else a
      :exc:`KeyError` exception will be raised, so in general it is incorrect
      for *arg* to be a :class:`Mailbox` instance.

.. note::

Unlike with dictionaries, keyword arguments are not supported.

.. method:: flush()

Write any pending changes to the filesystem. For some :class:`Mailbox`
      subclasses, changes are always written immediately and :meth:`flush` does
      nothing, but you should still make a habit of calling this method.

.. method:: lock()

Acquire an exclusive advisory lock on the mailbox so that other processes
      know not to modify it. An :exc:`ExternalClashError` is raised if the lock
      is not available. The particular locking mechanisms used depend upon the
      mailbox format.  You should *always* lock the mailbox before making any
      modifications to its contents.

.. method:: unlock()

Release the lock on the mailbox, if any.

.. method:: close()

Flush the mailbox, unlock it if necessary, and close any open files. For
      some :class:`Mailbox` subclasses, this method does nothing.

.. _mailbox-maildir:

:class:`Maildir`
^^^^^^^^^^^^^^^^

.. class:: Maildir(dirname, factory=rfc822.Message, create=True)

A subclass of :class:`Mailbox` for mailboxes in Maildir format. Parameter
   *factory* is a callable object that accepts a file-like message representation
   (which behaves as if opened in binary mode) and returns a custom representation.
   If *factory* is ``None``, :class:`MaildirMessage` is used as the default message
   representation. If *create* is ``True``, the mailbox is created if it does not
   exist.

It is for historical reasons that *factory* defaults to :class:`rfc822.Message`
   and that *dirname* is named as such rather than *path*. For a :class:`Maildir`
   instance that behaves like instances of other :class:`Mailbox` subclasses, set
   *factory* to ``None``.

Maildir is a directory-based mailbox format invented for the qmail mail
   transfer agent and now widely supported by other programs. Messages in a
   Maildir mailbox are stored in separate files within a common directory
   structure. This design allows Maildir mailboxes to be accessed and modified
   by multiple unrelated programs without data corruption, so file locking is
   unnecessary.

Maildir mailboxes contain three subdirectories, namely: :file:`tmp`,
   :file:`new`, and :file:`cur`. Messages are created momentarily in the
   :file:`tmp` subdirectory and then moved to the :file:`new` subdirectory to
   finalize delivery. A mail user agent may subsequently move the message to the
   :file:`cur` subdirectory and store information about the state of the message
   in a special "info" section appended to its file name.

Folders of the style introduced by the Courier mail transfer agent are also
   supported. Any subdirectory of the main mailbox is considered a folder if
   ``'.'`` is the first character in its name. Folder names are represented by
   :class:`Maildir` without the leading ``'.'``. Each folder is itself a Maildir
   mailbox but should not contain other folders. Instead, a logical nesting is
   indicated using ``'.'`` to delimit levels, e.g., "Archived.2005.07".

.. note::

The Maildir specification requires the use of a colon (``':'``) in certain
      message file names. However, some operating systems do not permit this
      character in file names, If you wish to use a Maildir-like format on such
      an operating system, you should specify another character to use
      instead. The exclamation point (``'!'``) is a popular choice. For
      example::

import mailbox
         mailbox.Maildir.colon = '!'

The :attr:`colon` attribute may also be set on a per-instance basis.

:class:`Maildir` instances have all of the methods of :class:`Mailbox` in
   addition to the following:

.. method:: list_folders()

Return a list of the names of all folders.

.. method:: get_folder(folder)

Return a :class:`Maildir` instance representing the folder whose name is
      *folder*. A :exc:`NoSuchMailboxError` exception is raised if the folder
      does not exist.

.. method:: add_folder(folder)

Create a folder whose name is *folder* and return a :class:`Maildir`
      instance representing it.

.. method:: remove_folder(folder)

Delete the folder whose name is *folder*. If the folder contains any
      messages, a :exc:`NotEmptyError` exception will be raised and the folder
      will not be deleted.

.. method:: clean()

Delete temporary files from the mailbox that have not been accessed in the
      last 36 hours. The Maildir specification says that mail-reading programs
      should do this occasionally.

Some :class:`Mailbox` methods implemented by :class:`Maildir` deserve special
   remarks:

.. method:: add(message)
               __setitem__(key, message)
               update(arg)

.. warning::

These methods generate unique file names based upon the current process
         ID. When using multiple threads, undetected name clashes may occur and
         cause corruption of the mailbox unless threads are coordinated to avoid
         using these methods to manipulate the same mailbox simultaneously.

.. method:: flush()

All changes to Maildir mailboxes are immediately applied, so this method
      does nothing.

.. method:: lock()
               unlock()

Maildir mailboxes do not support (or require) locking, so these methods do
      nothing.

.. method:: close()

:class:`Maildir` instances do not keep any open files and the underlying
      mailboxes do not support locking, so this method does nothing.

.. method:: get_file(key)

Depending upon the host platform, it may not be possible to modify or
      remove the underlying message while the returned file remains open.

.. seealso::

`maildir man page from qmail <http://www.qmail.org/man/man5/maildir.html>`_
      The original specification of the format.

`Using maildir format <https://cr.yp.to/proto/maildir.html>`_
      Notes on Maildir by its inventor. Includes an updated name-creation scheme and
      details on "info" semantics.

`maildir man page from Courier <http://www.courier-mta.org/maildir.html>`_
      Another specification of the format. Describes a common extension for supporting
      folders.

.. _mailbox-mbox:

:class:`mbox`
^^^^^^^^^^^^^

.. class:: mbox(path, factory=None, create=True)

A subclass of :class:`Mailbox` for mailboxes in mbox format. Parameter *factory*
   is a callable object that accepts a file-like message representation (which
   behaves as if opened in binary mode) and returns a custom representation. If
   *factory* is ``None``, :class:`mboxMessage` is used as the default message
   representation. If *create* is ``True``, the mailbox is created if it does not
   exist.

The mbox format is the classic format for storing mail on Unix systems. All
   messages in an mbox mailbox are stored in a single file with the beginning of
   each message indicated by a line whose first five characters are "From ".

Several variations of the mbox format exist to address perceived shortcomings in
   the original. In the interest of compatibility, :class:`mbox` implements the
   original format, which is sometimes referred to as :dfn:`mboxo`. This means that
   the :mailheader:`Content-Length` header, if present, is ignored and that any
   occurrences of "From " at the beginning of a line in a message body are
   transformed to ">From " when storing the message, although occurrences of ">From
   " are not transformed to "From " when reading the message.

Some :class:`Mailbox` methods implemented by :class:`mbox` deserve special
   remarks:

.. method:: get_file(key)

Using the file after calling :meth:`flush` or :meth:`close` on the
      :class:`mbox` instance may yield unpredictable results or raise an
      exception.

.. method:: lock()
               unlock()

Three locking mechanisms are used---dot locking and, if available, the
      :c:func:`flock` and :c:func:`lockf` system calls.

.. seealso::

`mbox man page from qmail <http://www.qmail.org/man/man5/mbox.html>`_
      A specification of the format and its variations.

`mbox man page from tin <http://www.tin.org/bin/man.cgi?section=5&topic=mbox>`_
      Another specification of the format, with details on locking.

`Configuring Netscape Mail on Unix: Why The Content-Length Format is Bad <https://www.jwz.org/doc/content-length.html>`_
      An argument for using the original mbox format rather than a variation.

`"mbox" is a family of several mutually incompatible mailbox formats <https://www.loc.gov/preservation/digital/formats/fdd/fdd000383.shtml>`_
      A history of mbox variations.

.. _mailbox-mh:

:class:`MH`
^^^^^^^^^^^

.. class:: MH(path, factory=None, create=True)

A subclass of :class:`Mailbox` for mailboxes in MH format. Parameter *factory*
   is a callable object that accepts a file-like message representation (which
   behaves as if opened in binary mode) and returns a custom representation. If
   *factory* is ``None``, :class:`MHMessage` is used as the default message
   representation. If *create* is ``True``, the mailbox is created if it does not
   exist.

MH is a directory-based mailbox format invented for the MH Message Handling
   System, a mail user agent. Each message in an MH mailbox resides in its own
   file. An MH mailbox may contain other MH mailboxes (called :dfn:`folders`) in
   addition to messages. Folders may be nested indefinitely. MH mailboxes also
   support :dfn:`sequences`, which are named lists used to logically group
   messages without moving them to sub-folders. Sequences are defined in a file
   called :file:`.mh_sequences` in each folder.

The :class:`MH` class manipulates MH mailboxes, but it does not attempt to
   emulate all of :program:`mh`'s behaviors. In particular, it does not modify
   and is not affected by the :file:`context` or :file:`.mh_profile` files that
   are used by :program:`mh` to store its state and configuration.

:class:`MH` instances have all of the methods of :class:`Mailbox` in addition
   to the following:

.. method:: list_folders()

Return a list of the names of all folders.

.. method:: get_folder(folder)

Return an :class:`MH` instance representing the folder whose name is
      *folder*. A :exc:`NoSuchMailboxError` exception is raised if the folder
      does not exist.

.. method:: add_folder(folder)

Create a folder whose name is *folder* and return an :class:`MH` instance
      representing it.

.. method:: remove_folder(folder)

Delete the folder whose name is *folder*. If the folder contains any
      messages, a :exc:`NotEmptyError` exception will be raised and the folder
      will not be deleted.

.. method:: get_sequences()

Return a dictionary of sequence names mapped to key lists. If there are no
      sequences, the empty dictionary is returned.

.. method:: set_sequences(sequences)

Re-define the sequences that exist in the mailbox based upon *sequences*,
      a dictionary of names mapped to key lists, like returned by
      :meth:`get_sequences`.

.. method:: pack()

Rename messages in the mailbox as necessary to eliminate gaps in
      numbering.  Entries in the sequences list are updated correspondingly.

.. note::

Already-issued keys are invalidated by this operation and should not be
         subsequently used.

Some :class:`Mailbox` methods implemented by :class:`MH` deserve special
   remarks:

.. method:: remove(key)
               __delitem__(key)
               discard(key)

These methods immediately delete the message. The MH convention of marking
      a message for deletion by prepending a comma to its name is not used.

.. method:: lock()
               unlock()

Three locking mechanisms are used---dot locking and, if available, the
      :c:func:`flock` and :c:func:`lockf` system calls. For MH mailboxes, locking
      the mailbox means locking the :file:`.mh_sequences` file and, only for the
      duration of any operations that affect them, locking individual message
      files.

.. method:: get_file(key)

Depending upon the host platform, it may not be possible to remove the
      underlying message while the returned file remains open.

.. method:: flush()

All changes to MH mailboxes are immediately applied, so this method does
      nothing.

.. method:: close()

:class:`MH` instances do not keep any open files, so this method is
      equivalent to :meth:`unlock`.

.. seealso::

`nmh - Message Handling System <http://www.nongnu.org/nmh/>`_
      Home page of :program:`nmh`, an updated version of the original :program:`mh`.

`MH & nmh: Email for Users & Programmers <http://rand-mh.sourceforge.net/book/>`_
      A GPL-licensed book on :program:`mh` and :program:`nmh`, with some information
      on the mailbox format.

.. _mailbox-babyl:

:class:`Babyl`
^^^^^^^^^^^^^^

.. class:: Babyl(path, factory=None, create=True)

A subclass of :class:`Mailbox` for mailboxes in Babyl format. Parameter
   *factory* is a callable object that accepts a file-like message representation
   (which behaves as if opened in binary mode) and returns a custom representation.
   If *factory* is ``None``, :class:`BabylMessage` is used as the default message
   representation. If *create* is ``True``, the mailbox is created if it does not
   exist.

Babyl is a single-file mailbox format used by the Rmail mail user agent
   included with Emacs. The beginning of a message is indicated by a line
   containing the two characters Control-Underscore (``'\037'``) and Control-L
   (``'\014'``). The end of a message is indicated by the start of the next
   message or, in the case of the last message, a line containing a
   Control-Underscore (``'\037'``) character.

Messages in a Babyl mailbox have two sets of headers, original headers and
   so-called visible headers. Visible headers are typically a subset of the
   original headers that have been reformatted or abridged to be more
   attractive. Each message in a Babyl mailbox also has an accompanying list of
   :dfn:`labels`, or short strings that record extra information about the
   message, and a list of all user-defined labels found in the mailbox is kept
   in the Babyl options section.

:class:`Babyl` instances have all of the methods of :class:`Mailbox` in
   addition to the following:

.. method:: get_labels()

Return a list of the names of all user-defined labels used in the mailbox.

.. note::

The actual messages are inspected to determine which labels exist in
         the mailbox rather than consulting the list of labels in the Babyl
         options section, but the Babyl section is updated whenever the mailbox
         is modified.

Some :class:`Mailbox` methods implemented by :class:`Babyl` deserve special
   remarks:

.. method:: get_file(key)

In Babyl mailboxes, the headers of a message are not stored contiguously
      with the body of the message. To generate a file-like representation, the
      headers and body are copied together into a :class:`~StringIO.StringIO` instance
      (from the :mod:`StringIO` module), which has an API identical to that of a
      file. As a result, the file-like object is truly independent of the
      underlying mailbox but does not save memory compared to a string
      representation.

.. method:: lock()
               unlock()

Three locking mechanisms are used---dot locking and, if available, the
      :c:func:`flock` and :c:func:`lockf` system calls.

.. seealso::

`Format of Version 5 Babyl Files <https://quimby.gnus.org/notes/BABYL>`_
      A specification of the Babyl format.

`Reading Mail with Rmail <https://www.gnu.org/software/emacs/manual/html_node/emacs/Rmail.html>`_
      The Rmail manual, with some information on Babyl semantics.

.. _mailbox-mmdf:

:class:`MMDF`
^^^^^^^^^^^^^

.. class:: MMDF(path, factory=None, create=True)

A subclass of :class:`Mailbox` for mailboxes in MMDF format. Parameter *factory*
   is a callable object that accepts a file-like message representation (which
   behaves as if opened in binary mode) and returns a custom representation. If
   *factory* is ``None``, :class:`MMDFMessage` is used as the default message
   representation. If *create* is ``True``, the mailbox is created if it does not
   exist.

MMDF is a single-file mailbox format invented for the Multichannel Memorandum
   Distribution Facility, a mail transfer agent. Each message is in the same
   form as an mbox message but is bracketed before and after by lines containing
   four Control-A (``'\001'``) characters. As with the mbox format, the
   beginning of each message is indicated by a line whose first five characters
   are "From ", but additional occurrences of "From " are not transformed to
   ">From " when storing messages because the extra message separator lines
   prevent mistaking such occurrences for the starts of subsequent messages.

Some :class:`Mailbox` methods implemented by :class:`MMDF` deserve special
   remarks:

.. method:: get_file(key)

Using the file after calling :meth:`flush` or :meth:`close` on the
      :class:`MMDF` instance may yield unpredictable results or raise an
      exception.

.. method:: lock()
               unlock()

Three locking mechanisms are used---dot locking and, if available, the
      :c:func:`flock` and :c:func:`lockf` system calls.

.. seealso::

`mmdf man page from tin <http://www.tin.org/bin/man.cgi?section=5&topic=mmdf>`_
      A specification of MMDF format from the documentation of tin, a newsreader.

`MMDF <https://en.wikipedia.org/wiki/MMDF>`_
      A Wikipedia article describing the Multichannel Memorandum Distribution
      Facility.

.. _mailbox-message-objects:

:class:`Message` objects
------------------------

.. class:: Message([message])

A subclass of the :mod:`email.message` module's
   :class:`~email.message.Message`. Subclasses of :class:`mailbox.Message` add
   mailbox-format-specific state and behavior.

If *message* is omitted, the new instance is created in a default, empty state.
   If *message* is an :class:`email.message.Message` instance, its contents are
   copied; furthermore, any format-specific information is converted insofar as
   possible if *message* is a :class:`Message` instance. If *message* is a string
   or a file, it should contain an :rfc:`2822`\ -compliant message, which is read
   and parsed.

The format-specific state and behaviors offered by subclasses vary, but in
   general it is only the properties that are not specific to a particular
   mailbox that are supported (although presumably the properties are specific
   to a particular mailbox format). For example, file offsets for single-file
   mailbox formats and file names for directory-based mailbox formats are not
   retained, because they are only applicable to the original mailbox. But state
   such as whether a message has been read by the user or marked as important is
   retained, because it applies to the message itself.

There is no requirement that :class:`Message` instances be used to represent
   messages retrieved using :class:`Mailbox` instances. In some situations, the
   time and memory required to generate :class:`Message` representations might
   not be acceptable. For such situations, :class:`Mailbox` instances also
   offer string and file-like representations, and a custom message factory may
   be specified when a :class:`Mailbox` instance is initialized.

.. _mailbox-maildirmessage:

:class:`MaildirMessage`
^^^^^^^^^^^^^^^^^^^^^^^

.. class:: MaildirMessage([message])

A message with Maildir-specific behaviors. Parameter *message* has the same
   meaning as with the :class:`Message` constructor.

Typically, a mail user agent application moves all of the messages in the
   :file:`new` subdirectory to the :file:`cur` subdirectory after the first time
   the user opens and closes the mailbox, recording that the messages are old
   whether or not they've actually been read. Each message in :file:`cur` has an
   "info" section added to its file name to store information about its state.
   (Some mail readers may also add an "info" section to messages in
   :file:`new`.)  The "info" section may take one of two forms: it may contain
   "2," followed by a list of standardized flags (e.g., "2,FR") or it may
   contain "1," followed by so-called experimental information. Standard flags
   for Maildir messages are as follows:

+------+---------+--------------------------------+
   | Flag | Meaning | Explanation                    |
   +======+=========+================================+
   | D    | Draft   | Under composition              |
   +------+---------+--------------------------------+
   | F    | Flagged | Marked as important            |
   +------+---------+--------------------------------+
   | P    | Passed  | Forwarded, resent, or bounced  |
   +------+---------+--------------------------------+
   | R    | Replied | Replied to                     |
   +------+---------+--------------------------------+
   | S    | Seen    | Read                           |
   +------+---------+--------------------------------+
   | T    | Trashed | Marked for subsequent deletion |
   +------+---------+--------------------------------+

:class:`MaildirMessage` instances offer the following methods:

.. method:: get_subdir()

Return either "new" (if the message should be stored in the :file:`new`
      subdirectory) or "cur" (if the message should be stored in the :file:`cur`
      subdirectory).

.. note::

A message is typically moved from :file:`new` to :file:`cur` after its
         mailbox has been accessed, whether or not the message is has been
         read. A message ``msg`` has been read if ``"S" in msg.get_flags()`` is
         ``True``.

.. method:: set_subdir(subdir)

Set the subdirectory the message should be stored in. Parameter *subdir*
      must be either "new" or "cur".

.. method:: get_flags()

Return a string specifying the flags that are currently set. If the
      message complies with the standard Maildir format, the result is the
      concatenation in alphabetical order of zero or one occurrence of each of
      ``'D'``, ``'F'``, ``'P'``, ``'R'``, ``'S'``, and ``'T'``. The empty string
      is returned if no flags are set or if "info" contains experimental
      semantics.

.. method:: set_flags(flags)

Set the flags specified by *flags* and unset all others.

.. method:: add_flag(flag)

Set the flag(s) specified by *flag* without changing other flags. To add
      more than one flag at a time, *flag* may be a string of more than one
      character. The current "info" is overwritten whether or not it contains
      experimental information rather than flags.

.. method:: remove_flag(flag)

Unset the flag(s) specified by *flag* without changing other flags. To
      remove more than one flag at a time, *flag* maybe a string of more than
      one character.  If "info" contains experimental information rather than
      flags, the current "info" is not modified.

.. method:: get_date()

Return the delivery date of the message as a floating-point number
      representing seconds since the epoch.

.. method:: set_date(date)

Set the delivery date of the message to *date*, a floating-point number
      representing seconds since the epoch.

.. method:: get_info()

Return a string containing the "info" for a message. This is useful for
      accessing and modifying "info" that is experimental (i.e., not a list of
      flags).

.. method:: set_info(info)

Set "info" to *info*, which should be a string.

When a :class:`MaildirMessage` instance is created based upon an
:class:`mboxMessage` or :class:`MMDFMessage` instance, the :mailheader:`Status`
and :mailheader:`X-Status` headers are omitted and the following conversions
take place:

When a :class:`MaildirMessage` instance is created based upon an
:class:`MHMessage` instance, the following conversions take place:

When a :class:`MaildirMessage` instance is created based upon a
:class:`BabylMessage` instance, the following conversions take place:

.. _mailbox-mboxmessage:

:class:`mboxMessage`
^^^^^^^^^^^^^^^^^^^^

.. class:: mboxMessage([message])

A message with mbox-specific behaviors. Parameter *message* has the same meaning
   as with the :class:`Message` constructor.

Messages in an mbox mailbox are stored together in a single file. The
   sender's envelope address and the time of delivery are typically stored in a
   line beginning with "From " that is used to indicate the start of a message,
   though there is considerable variation in the exact format of this data among
   mbox implementations. Flags that indicate the state of the message, such as
   whether it has been read or marked as important, are typically stored in
   :mailheader:`Status` and :mailheader:`X-Status` headers.

Conventional flags for mbox messages are as follows:

+------+----------+--------------------------------+
   | Flag | Meaning  | Explanation                    |
   +======+==========+================================+
   | R    | Read     | Read                           |
   +------+----------+--------------------------------+
   | O    | Old      | Previously detected by MUA     |
   +------+----------+--------------------------------+
   | D    | Deleted  | Marked for subsequent deletion |
   +------+----------+--------------------------------+
   | F    | Flagged  | Marked as important            |
   +------+----------+--------------------------------+
   | A    | Answered | Replied to                     |
   +------+----------+--------------------------------+

The "R" and "O" flags are stored in the :mailheader:`Status` header, and the
   "D", "F", and "A" flags are stored in the :mailheader:`X-Status` header. The
   flags and headers typically appear in the order mentioned.

:class:`mboxMessage` instances offer the following methods:

.. method:: get_from()

Return a string representing the "From " line that marks the start of the
      message in an mbox mailbox. The leading "From " and the trailing newline
      are excluded.

.. method:: set_from(from_, time_=None)

Set the "From " line to *from_*, which should be specified without a
      leading "From " or trailing newline. For convenience, *time_* may be
      specified and will be formatted appropriately and appended to *from_*. If
      *time_* is specified, it should be a :class:`time.struct_time` instance, a
      tuple suitable for passing to :meth:`time.strftime`, or ``True`` (to use
      :meth:`time.gmtime`).

.. method:: get_flags()

Return a string specifying the flags that are currently set. If the
      message complies with the conventional format, the result is the
      concatenation in the following order of zero or one occurrence of each of
      ``'R'``, ``'O'``, ``'D'``, ``'F'``, and ``'A'``.

.. method:: set_flags(flags)

Set the flags specified by *flags* and unset all others. Parameter *flags*
      should be the concatenation in any order of zero or more occurrences of
      each of ``'R'``, ``'O'``, ``'D'``, ``'F'``, and ``'A'``.

.. method:: add_flag(flag)

Set the flag(s) specified by *flag* without changing other flags. To add
      more than one flag at a time, *flag* may be a string of more than one
      character.

.. method:: remove_flag(flag)

Unset the flag(s) specified by *flag* without changing other flags. To
      remove more than one flag at a time, *flag* maybe a string of more than
      one character.

When an :class:`mboxMessage` instance is created based upon a
:class:`MaildirMessage` instance, a "From " line is generated based upon the
:class:`MaildirMessage` instance's delivery date, and the following conversions
take place:

When an :class:`mboxMessage` instance is created based upon an
:class:`MHMessage` instance, the following conversions take place:

When an :class:`mboxMessage` instance is created based upon a
:class:`BabylMessage` instance, the following conversions take place:

When a :class:`Message` instance is created based upon an :class:`MMDFMessage`
instance, the "From " line is copied and all flags directly correspond:

.. _mailbox-mhmessage:

:class:`MHMessage`
^^^^^^^^^^^^^^^^^^

.. class:: MHMessage([message])

A message with MH-specific behaviors. Parameter *message* has the same meaning
   as with the :class:`Message` constructor.

MH messages do not support marks or flags in the traditional sense, but they
   do support sequences, which are logical groupings of arbitrary messages. Some
   mail reading programs (although not the standard :program:`mh` and
   :program:`nmh`) use sequences in much the same way flags are used with other
   formats, as follows:

:class:`MHMessage` instances offer the following methods:

.. method:: get_sequences()

Return a list of the names of sequences that include this message.

.. method:: set_sequences(sequences)

Set the list of sequences that include this message.

.. method:: add_sequence(sequence)

Add *sequence* to the list of sequences that include this message.

.. method:: remove_sequence(sequence)

Remove *sequence* from the list of sequences that include this message.

When an :class:`MHMessage` instance is created based upon a
:class:`MaildirMessage` instance, the following conversions take place:

When an :class:`MHMessage` instance is created based upon an
:class:`mboxMessage` or :class:`MMDFMessage` instance, the :mailheader:`Status`
and :mailheader:`X-Status` headers are omitted and the following conversions
take place:

When an :class:`MHMessage` instance is created based upon a
:class:`BabylMessage` instance, the following conversions take place:

.. _mailbox-babylmessage:

:class:`BabylMessage`
^^^^^^^^^^^^^^^^^^^^^

.. class:: BabylMessage([message])

A message with Babyl-specific behaviors. Parameter *message* has the same
   meaning as with the :class:`Message` constructor.

Certain message labels, called :dfn:`attributes`, are defined by convention
   to have special meanings. The attributes are as follows:

By default, Rmail displays only visible headers. The :class:`BabylMessage`
   class, though, uses the original headers because they are more
   complete. Visible headers may be accessed explicitly if desired.

:class:`BabylMessage` instances offer the following methods:

.. method:: get_labels()

Return a list of labels on the message.

.. method:: set_labels(labels)

Set the list of labels on the message to *labels*.

.. method:: add_label(label)

Add *label* to the list of labels on the message.

.. method:: remove_label(label)

Remove *label* from the list of labels on the message.

.. method:: get_visible()

Return an :class:`Message` instance whose headers are the message's
      visible headers and whose body is empty.

.. method:: set_visible(visible)

Set the message's visible headers to be the same as the headers in
      *message*.  Parameter *visible* should be a :class:`Message` instance, an
      :class:`email.message.Message` instance, a string, or a file-like object
      (which should be open in text mode).

.. method:: update_visible()

When a :class:`BabylMessage` instance's original headers are modified, the
      visible headers are not automatically modified to correspond. This method
      updates the visible headers as follows: each visible header with a
      corresponding original header is set to the value of the original header,
      each visible header without a corresponding original header is removed,
      and any of :mailheader:`Date`, :mailheader:`From`, :mailheader:`Reply-To`,
      :mailheader:`To`, :mailheader:`CC`, and :mailheader:`Subject` that are
      present in the original headers but not the visible headers are added to
      the visible headers.

When a :class:`BabylMessage` instance is created based upon a
:class:`MaildirMessage` instance, the following conversions take place:

When a :class:`BabylMessage` instance is created based upon an
:class:`mboxMessage` or :class:`MMDFMessage` instance, the :mailheader:`Status`
and :mailheader:`X-Status` headers are omitted and the following conversions
take place:

When a :class:`BabylMessage` instance is created based upon an
:class:`MHMessage` instance, the following conversions take place:

.. _mailbox-mmdfmessage:

:class:`MMDFMessage`
^^^^^^^^^^^^^^^^^^^^

.. class:: MMDFMessage([message])

A message with MMDF-specific behaviors. Parameter *message* has the same meaning
   as with the :class:`Message` constructor.

As with message in an mbox mailbox, MMDF messages are stored with the
   sender's address and the delivery date in an initial line beginning with
   "From ".  Likewise, flags that indicate the state of the message are
   typically stored in :mailheader:`Status` and :mailheader:`X-Status` headers.

Conventional flags for MMDF messages are identical to those of mbox message
   and are as follows:

:class:`MMDFMessage` instances offer the following methods, which are
   identical to those offered by :class:`mboxMessage`:

.. method:: get_from()

Return a string representing the "From " line that marks the start of the
      message in an mbox mailbox. The leading "From " and the trailing newline
      are excluded.

.. method:: set_from(from_, time_=None)

.. method:: get_flags()

.. method:: set_flags(flags)

.. method:: add_flag(flag)

Set the flag(s) specified by *flag* without changing other flags. To add
      more than one flag at a time, *flag* may be a string of more than one
      character.

.. method:: remove_flag(flag)

Unset the flag(s) specified by *flag* without changing other flags. To
      remove more than one flag at a time, *flag* maybe a string of more than
      one character.

When an :class:`MMDFMessage` instance is created based upon a
:class:`MaildirMessage` instance, a "From " line is generated based upon the
:class:`MaildirMessage` instance's delivery date, and the following conversions
take place:

When an :class:`MMDFMessage` instance is created based upon an
:class:`MHMessage` instance, the following conversions take place:

When an :class:`MMDFMessage` instance is created based upon a
:class:`BabylMessage` instance, the following conversions take place:

When an :class:`MMDFMessage` instance is created based upon an
:class:`mboxMessage` instance, the "From " line is copied and all flags directly
correspond:

Exceptions
----------

The following exception classes are defined in the :mod:`mailbox` module:

.. exception:: Error()

The based class for all other module-specific exceptions.

.. exception:: NoSuchMailboxError()

Raised when a mailbox is expected but is not found, such as when instantiating a
   :class:`Mailbox` subclass with a path that does not exist (and with the *create*
   parameter set to ``False``), or when opening a folder that does not exist.

.. exception:: NotEmptyError()

Raised when a mailbox is not empty but is expected to be, such as when deleting
   a folder that contains messages.

.. exception:: ExternalClashError()

Raised when some mailbox-related condition beyond the control of the program
   causes it to be unable to proceed, such as when failing to acquire a lock that
   another program already holds a lock, or when a uniquely-generated file name
   already exists.

.. exception:: FormatError()

Raised when the data in a file cannot be parsed, such as when an :class:`MH`
   instance attempts to read a corrupted :file:`.mh_sequences` file.

.. _mailbox-deprecated:

Deprecated classes and methods
------------------------------

.. deprecated:: 2.6

Older versions of the :mod:`mailbox` module do not support modification of
mailboxes, such as adding or removing message, and do not provide classes to
represent format-specific message properties. For backward compatibility, the
older mailbox classes are still available, but the newer classes should be used
in preference to them.  The old classes have been removed in Python 3.

Older mailbox objects support only iteration and provide a single public method:

.. method:: oldmailbox.next()

Return the next message in the mailbox, created with the optional *factory*
   argument passed into the mailbox object's constructor. By default this is an
   :class:`rfc822.Message` object (see the :mod:`rfc822` module).  Depending on the
   mailbox implementation the *fp* attribute of this object may be a true file
   object or a class instance simulating a file object, taking care of things like
   message boundaries if multiple mail messages are contained in a single file,
   etc.  If no more messages are available, this method returns ``None``.

Most of the older mailbox classes have names that differ from the current
mailbox class names, except for :class:`Maildir`. For this reason, the new
:class:`Maildir` class defines a :meth:`!next` method and its constructor differs
slightly from those of the other new mailbox classes.

The older mailbox classes whose names are not the same as their newer
counterparts are as follows:

.. class:: UnixMailbox(fp[, factory])

Access to a classic Unix-style mailbox, where all messages are contained in a
   single file and separated by ``From`` (a.k.a. ``From_``) lines.  The file object
   *fp* points to the mailbox file.  The optional *factory* parameter is a callable
   that should create new message objects.  *factory* is called with one argument,
   *fp* by the :meth:`!next` method of the mailbox object.  The default is the
   :class:`rfc822.Message` class (see the :mod:`rfc822` module -- and the note
   below).

.. note::

For reasons of this module's internal implementation, you will probably want to
      open the *fp* object in binary mode.  This is especially important on Windows.

For maximum portability, messages in a Unix-style mailbox are separated by any
   line that begins exactly with the string ``'From '`` (note the trailing space)
   if preceded by exactly two newlines. Because of the wide-range of variations in
   practice, nothing else on the ``From_`` line should be considered.  However, the
   current implementation doesn't check for the leading two newlines.  This is
   usually fine for most applications.

The :class:`UnixMailbox` class implements a more strict version of ``From_``
   line checking, using a regular expression that usually correctly matched
   ``From_`` delimiters.  It considers delimiter line to be separated by ``From
   name time`` lines.  For maximum portability, use the
   :class:`PortableUnixMailbox` class instead.  This class is identical to
   :class:`UnixMailbox` except that individual messages are separated by only
   ``From`` lines.

.. class:: PortableUnixMailbox(fp[, factory])

A less-strict version of :class:`UnixMailbox`, which considers only the ``From``
   at the beginning of the line separating messages.  The "*name* *time*" portion
   of the From line is ignored, to protect against some variations that are
   observed in practice.  This works since lines in the message which begin with
   ``'From '`` are quoted by mail handling software at delivery-time.

.. class:: MmdfMailbox(fp[, factory])

Access an MMDF-style mailbox, where all messages are contained in a single file
   and separated by lines consisting of 4 control-A characters.  The file object
   *fp* points to the mailbox file. Optional *factory* is as with the
   :class:`UnixMailbox` class.

.. class:: MHMailbox(dirname[, factory])

Access an MH mailbox, a directory with each message in a separate file with a
   numeric name. The name of the mailbox directory is passed in *dirname*.
   *factory* is as with the :class:`UnixMailbox` class.

.. class:: BabylMailbox(fp[, factory])

Access a Babyl mailbox, which is similar to an MMDF mailbox.  In Babyl format,
   each message has two sets of headers, the *original* headers and the *visible*
   headers.  The original headers appear before a line containing only ``'*** EOOH
   ***'`` (End-Of-Original-Headers) and the visible headers appear after the
   ``EOOH`` line.  Babyl-compliant mail readers will show you only the visible
   headers, and :class:`BabylMailbox` objects will return messages containing only
   the visible headers.  You'll have to do your own parsing of the mailbox file to
   get at the original headers.  Mail messages start with the EOOH line and end
   with a line containing only ``'\037\014'``.  *factory* is as with the
   :class:`UnixMailbox` class.

If you wish to use the older mailbox classes with the :mod:`email` module rather
than the deprecated :mod:`rfc822` module, you can do so as follows::

import email
   import email.Errors
   import mailbox

def msgfactory(fp):
       try:
           return email.message_from_file(fp)
       except email.Errors.MessageParseError:
           # Don't return None since that will
           # stop the mailbox iterator
           return ''

mbox = mailbox.UnixMailbox(fp, msgfactory)

Alternatively, if you know your mailbox contains only well-formed MIME messages,
you can simplify this to::

import email
   import mailbox

mbox = mailbox.UnixMailbox(fp, email.message_from_file)

.. _mailbox-examples:

Examples
--------

A simple example of printing the subjects of all messages in a mailbox that seem
interesting::

import mailbox
   for message in mailbox.mbox('~/mbox'):
       subject = message['subject']       # Could possibly be None.
       if subject and 'python' in subject.lower():
           print subject

To copy all mail from a Babyl mailbox to an MH mailbox, converting all of the
format-specific information that can be converted::

import mailbox
   destination = mailbox.MH('~/Mail')
   destination.lock()
   for message in mailbox.Babyl('~/RMAIL'):
       destination.add(mailbox.MHMessage(message))
   destination.flush()
   destination.unlock()

This example sorts mail from several mailing lists into different mailboxes,
being careful to avoid mail corruption due to concurrent modification by other
programs, mail loss due to interruption of the program, or premature termination
due to malformed messages in the mailbox::

import mailbox
   import email.errors

list_names = ('python-list', 'python-dev', 'python-bugs')

boxes = dict((name, mailbox.mbox('~/email/%s' % name)) for name in list_names)
   inbox = mailbox.Maildir('~/Maildir', factory=None)

for key in inbox.iterkeys():
       try:
           message = inbox[key]
       except email.errors.MessageParseError:
           continue                # The message is malformed. Just leave it.

for name in list_names:
           list_id = message['list-id']
           if list_id and name in list_id:
               # Get mailbox to use
               box = boxes[name]

# Write copy to disk before removing original.
               # If there's a crash, you might duplicate a message, but
               # that's better than losing a message completely.
               box.lock()
               box.add(message)
               box.flush()
               box.unlock()

# Remove original message
               inbox.lock()
               inbox.discard(key)
               inbox.flush()
               inbox.unlock()
               break               # Found destination, so stop looking.

for box in boxes.itervalues():
       box.close()

cmd: